Samsung ACCUVIX XG Manual de usuario descargar pdf (Pagina 251)

5-11

Chapter 5 Measurements and Calculations

Distance Measurement

Distance

This is a basic measurement that is available in all diagnosis modes. You can specify two points in a 2D

image and measure the straight distance between them.

1. Press the Distance button on the touch screen. “Distance” is displayed in the user information area.

2. Use the trackball and the Set button on the control panel to specify both end points of the

measurement area.

X

Use the trackball to place the cursor at the desired position and press the Set button.

Tips!

Repositioning Point

Pressing the Update button before pressing the Set button to complete positioning resets the

position of a point just set.

3. Specify both end points and then the distance between them will be measured.

4. Once measurement is done, the result is displayed on the screen.

Line Trace

It is a basic measurement that is available in all diagnosis modes. You can specify a point in a 2D image

and trace a curve from that point to measure the distance between them.

1. Press the Line Trace button on the touch screen. “Line Trace” is displayed in the user information

area.

2. Use the trackball and the Set button on the control panel to specify the start point of the

measurement area.

X

Use the trackball to place the cursor at the desired position and press the Set button.

3. Use the trackball to draw the desired curve and then press the Set button to set the end point.

Tips!

Editing Curve

Before pressing the Set button to specify the end point, you can rotate the [5] Delete dial-button

on the softmenu to delete a part of the curve being traced.

4. Specify both end points and then the length of the curve will be automatically measured.

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 373 374

Sin comentarios

Samsung ACCUVIX XG Manual de usuario Pagina 251