Samsung SV-651B Manual de servicio descargar pdf (Pagina 160)

GE HEALTHCARE

DIRECTION 5194296-100, REVISION 10 LOGIQ BOOK XP SERIES BASIC SERVICE MANUAL

7-4 Section 7-3 - Screen Captures

Section 7-3

Screen Captures

There may be times when the customer or field engineer will want to capture a presentation on the

screen. This is accomplished by first saving the image(s) to the clipboard using a Print Key.

The P3 key is the factory default print key to accomplish a secondary screen capture. However, the

default is for the video area only or the customer may have customized the P3 Key function. Therefore,

screen capture should involve the following steps:

1.) Check and record any custom settings for the Print3 button.

2.) Set the Print3 button to Whole Screen, Secondary Capture.

3.) Capture the required screens to the Hard Drive or CD-R.

4.) Restore the Print3 button to it’s original settings.

7-3-1 Check and Record the P3 Key Function

Check the function of the Print 3 Key in the event that the customer may have made some custom

settings.

1.) Click Utility on the keyboard.

2.) Select Advanced>Connectivity from the Utilities Menu.

3.) Select the Buttons tab on the Connectivity screen.

4.) In the Button field, select Print3.

The Connectivity/Buttons Screen will be displayed like the one shown in Figure 7-2 on page 7-4 .

P3 is the factory default Screen Capture Key. If it is not set to Whole Screen or Screen Capture, as

shown in Figure 7-2, proceed to step 5 to record the customer’s custom settings.

Figure 7-2 Buttons Set Up Screen

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 225 226

Sin comentarios

Samsung SV-651B Manual de servicio Pagina 160