Samsung SONOACE R3 Manual de usuario descargar pdf (Pagina 104)

Operation Manual

4-18



▶

Tag Width: It is available when Color Tag is on. Use the Menu dial-button to select the range of

tags, from between 8 - 256. Tag Width aect to Tag Pos.

NOTE: For information on other menu items, please refer to “2D Mode.”

C Mode Softmenu

Following items are displayed on soft menu in C mode. Select the item and adjust the value with the

Softmenu button [1] – [5] on the control panel.



■

Scale

Use the Softmenu button [1]. Pressing the upside of the button makes the PRF (Pulse Repetition

Frequency) increase so that the speed range of the blood ow is widened, and vice versa.



■

Baseline

Use the Softmenu button [2]. When the display method for Color Mode is set to Var, the baseline cannot

be adjusted.



■

Filter

Use the Softmenu button [3]. Filter is an electrical lter used to eliminate low-frequency Doppler signals

caused by the motion of vessel walls. Adjust Cuto Frequency to remove from the screen the Doppler

signals for which the frequencies are lower than the Cuto Frequency. Press the upside of the button to

raise cuto frequency, and vice versa.



■

Steer

NOTE: This item appears in the softmenu only when a Linear Probe is used.

Use the Softmenu button [5]. Adjust the angle of the ultrasound beam. This can minimize loss of color

information based on the angle of the ultrasound beam. Press the button to select Left, None, or Right

for ROI.

NOTE: For information on other softmenu items, please refer to “2D Mode.”

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 290 291

Sin comentarios

Samsung SONOACE R3 Manual de usuario Pagina 104