Samsung MYSONO U6 Manual de usuario descargar pdf (Pagina 144)

4-36

Operation Manual

2D/C/M Mode

Color Doppler Mode and M Mode are displayed simultaneously.

In Color Doppler Mode, press the M button on the control panel. Or, in M mode, press the C button on

the control panel. (This mode is enabled for specic diagnostic applications with specic probes only.)

2D/C Live Mode

2D Mode and Color Doppler Mode are displayed simultaneously. In 2D mode, select the soft menu’s dial-

button [5] 2D/C Live.

Changing Combined Mode Format

 Changing the Active Image Mode

Press the Set button on the control panel. The current active image mode – ‘D Only’ or ‘2D Only’ - is

displayed above the menu on the screen.

In Combined Mode, more than two image modes are used at the same time. The image mode

currently in use is called the “Active Image Mode”. For example, if Sample Volume is moved with the

trackball in 2D/C/PW Mode, PW Spectral Doppler Mode becomes the current active image mode.

Because the menu and button options vary depending on the active image mode, you can use the

Set button to change the active image mode.

Note that the active image mode cannot be changed with the Set button when the Freeze function

is in eect.

 Changing the menu

Press the Active Mode button on the control panel.

This changes the menu and the soft menu without aecting the active image mode. The functions

of the buttons on the control panel vary depending on the active image mode.

For example, pressing the Active Mode button while in 2D/C/PW mode with the 2D mode soft

menu loaded on the screen loads up Color Doppler mode’s soft menu.

NOTE: For information on optimizing an image in Combined Mode, please refer to ‘Basic Mode’.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 281 282

Sin comentarios

Samsung MYSONO U6 Manual de usuario Pagina 144