
Chapter 4 Diagnosis Modes
4-9
■
DMR Lite Index
DMR Lite Index is displayed on the soft menu only when DMR Lite is set to On. Three preset indexes
are provided. Select from indexes 1 to 3 using the dial-button.
■
Rotation
Turning the dial-button clockwise rotates the image in the same direction. The rotation angle is 90°
at a time.
■
U/D Flip
Each time you press the dial-button, the image is ipped upside down.
■
Frame Rate
This is the rate by which the image displayed is updated per second. Use the dial-button to select
Fast, Normal or Slow.
It is recommended to set a high frame rate for objects that are highly active or fast-moving.
■
View Area
Set the width of the image. Select a value 100, 90, 80, or 60% with the dial-button. Increasing the
image width decreases the frame rate.
■
Density
Set the scan line density. Use the dial-button to select Medium, High or Low.
Selecting High will increase the number of scan lines and therefore increase the image resolution.
Note that the frame rate will drop.
■
Trapezoidal
NOTE: Trapezoidal will appear on the menu only when using the linear probe.
Press the dial-button to turn it on or o. When on, the rectangular frame provided by the linear
probe is changed to a trapezoidal shape. Using this trapezoidal frame, you can view a larger area of
the image.
The Trapezoidal function is not available at certain depths. Also, when the Trapezoidal function is in
use, the Zoom button cannot be used.
Comentarios a estos manuales