Samsung ML-1610 - B/W Laser Printer Manual de usuario descargar pdf (Pagina 7)

25) Clean out the old conductive grease from the PCR contact hub and replace with new. A small amount of grease is fine,

more is not better when it comes to conductive grease. See Figure 28

26) Install the PCR by sliding it through the non contact side, and into the contact hub. See Figure 29

27) Fill the hopper with the appropriate toner. Replace the fill plug, check for leaks. See Figure 30

28) Install the gear side end cap, and 2 screws. Make sure the PCR fits correctly in its holder, and all the gears are aligned.

See Figure 31

29) Install the waste chamber by sliding the tab through the slot in the end cap. Rotate it down, and install the two screws.

See Figure’s 32 & 33

Figure 26 Figure 27

Figure 28 Figure 29

Figure 30 Figure 31

Page 7 of 9SUMMIT TECHNOLOGIES

4/21/2008htt

://www.summitechnolo

ies.com/docs/0365/0365.as

1 2 3 4 5 6 7 8 9

Sin comentarios

Samsung ML-1610 - B/W Laser Printer Manual de usuario Pagina 7