Samsung ML-1610 - B/W Laser Printer Manual de usuario Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 9
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
3) On the front edge of the cartridge, there are two screws, remove them. See Figure 6
4) Lift up and remove the waste chamber from the cartridge. Make sure the tab on the right side slide out of the slot. If you
try to lift the cover off with out sliding the tab out, it will break off. See Figure 7
5) Remove the two screws and wiper blade from the waste chamber. See Figures 8 & 9
6) Clean out any remaining toner from the waste chamber.
7) Re-install the wiper blade and two screws. Place the waste chamber aside. See Figure 10
8) Remove the two screws from the right side end cap. Carefully pry off the end cap. See Figure 11
Figure 4 Figure 5
Figure 6 Figure 7
Figure 8 Figure 9
Page 3 of 9SUMMIT TECHNOLOGIES
4/21/2008htt
p
://www.summitechnolo
g
ies.com/docs/0365/0365.as
p
Vista de pagina 2
1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios