Samsung ML-1610 - B/W Laser Printer Manual de usuario descargar pdf (Pagina 5)

14) Gently pry out the roller plate from the cartridge by pressing in on a tab located on the bottom of the cartridge. There is

a sprint that is in contact with the developer roller shaft. Move the tail of the spring up so that as the plate is lifted out, it will

fall behind it. See Figure 16

16) Remove the Developer Roller by lifting it out. See Figure 17

17) Remove the 2 screws on the doctor blade. On the fill plug side of the blade, there is the other tail of the spring. Lift it up

while removing the doctor blade so it is not damaged. See Figures 18 & 19

It is highly recommended that the Doctor Blade be cleaned. Failure to do so will cause streaking. Dampen a cotton swab

with alcohol, and clean the blade. Be careful not to press too hard and damage the blade. If the blade has a heavy buildup

of toner on it, clean it with Acetone, and then alcohol.

Figure 14 Figure 15

Figure 16 Figure 17

Figure 18 Figure 19

Page 5 of 9SUMMIT TECHNOLOGIES

4/21/2008htt

://www.summitechnolo

ies.com/docs/0365/0365.as

1 2 3 4 5 6 7 8 9

Sin comentarios

Samsung ML-1610 - B/W Laser Printer Manual de usuario Pagina 5