Samsung ML-1610 - B/W Laser Printer Manual de usuario descargar pdf (Pagina 6)

18) Clean the feed roller and any remaining toner from the hopper. See Figure 20

19) Re-install the doctor blade and two screws. Make sure the tail of the spring fits into the proper slot. See Figures 21 &

20) Install the developer roller, keyed end to the gear side of the cartridge. See Figure 23

21) Install the roller plate. Route the tail of the spring so that it sits on top of the plate and is in contact with the shaft of the

developer roller. Lock the plate in place with the tab. See Figures 24 & 25

23) Install the 4 gears as shown. See Figure 26

24) Install the drum in place. See Figure 27

Figure 20 Figure 21

Figure 22 Figure 23

Figure 24 Figure 25

Page 6 of 9SUMMIT TECHNOLOGIES

4/21/2008htt

://www.summitechnolo

ies.com/docs/0365/0365.as

1 2 3 4 5 6 7 8 9

Sin comentarios

Samsung ML-1610 - B/W Laser Printer Manual de usuario Pagina 6