Samsung ML-1610 - B/W Laser Printer Manual de usuario Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 9
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
9) Remove the 4 gears, and place aside. See Figure 12
10) Slide the PCR away from the contact side, lift up and remove. See Figure 13
Clean the PCR with your normal PCR cleaner.
WARNING: Do not clean the OEM PCR with alcohol, as this will remove the conductive coating from the roller. If the PCR
is an aftermarket, follow the cleaning methods recommended by the manufacturer. If the PCR is an OEM, we recommend it
be cleaned with your standard PCR cleaner.
11) Remove the OPC drum. See Figure 14
12) Carefully pry out the fill plug. It fits tight and is easily damaged. Work a small jewelers screwdriver around the edge until
the plug comes free. See Figure 15
13) Clean out any remaining toner from the hopper.
Figure 10 Figure 11
Figure 12 Figure 13
Page 4 of 9SUMMIT TECHNOLOGIES
4/21/2008htt
p
://www.summitechnolo
g
ies.com/docs/0365/0365.as
p
Vista de pagina 3
1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios