Samsung MIM-B17 Manual de usuario descargar pdf (Pagina 28)

E-27

Setting the DMS2 (Continued)

Note

 Factory setting is as follows.

- IP address: 192.168.0.100

- Subnet mask address: 255.255.255.0

- Default gateway: 192.168.0.1 - DNS server: 0.0.0.0

 If you enabled the function by checking ‘DHCP‘, you

can check changed network information on the

external LCD display.

 If ‘DHCP’ is set, IP address from DHCP server will be

displayed.

 DMS2 sets service engineer IP(192.168.0.254)

internally.

And it is available to use regardless of current IP

setting.

 DMS2 gets automatically set IP address when you

activate DHCP function.

When connecting DMS2 to S-NET series, you can

connect them using the IP.

However the auto setting IP address can be changed

by events such as network environment of restart.

In this case, it may cause communication failure

between S-NET series and DMS2. Therefore it is not

recommended to connect DMS2 using DHCP address

and S-NET series.

 Refer to the user manual if you want to check other

items of the system environment setting, tracking

which collects information about indoor and outdoor

units connected to DMS2, and setting for power

distribution.

To download the user manual, select [User manual]

after selecting [System settings] menu.

 This product must be used in a dedicated network

because it cannot respond to network attacks such as

hacking and viruses. When it is connected to the Internet

or an intranet (ex: an office LAN), it could be a risk of

illegal approach. Also, this may change it to a harmful

connection for other network devices. This is not the

responsibility of Samsung Electronics and not included in

compensation for the damage.

SOL_DMS2&BAC&LW_IBIM_EN_32138A-10_EN_150617.indd 27 2015-06-18 오후 5:34:06

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 107 108

Sin comentarios

Samsung MIM-B17 Manual de usuario Pagina 28