Samsung HS50 Manual de usuario descargar pdf (Pagina 33)

7-5

Chapter 7 Diagnosis Modes

Basic Use

The items that are commonly used in each diagnosis mode are shown below:

 Using the Control Panel

The items that can be used in each diagnosis mode are provided as menu items. You can change

the image format or optimize an image to facilitate your diagnosis.



Gain

Use the dial-button on the control panel. The Gain button appears dierently depending on

the diagnosis mode, but it is usually in the form of a dial-button used to select a diagnosis

mode.

You can adjust the brightness of an image. If you rotate the Gain dial-button clockwise, its value

increases.



TGC (Time Gain Compensation)

Tap the TGC button on the touch screen to open the TGC window for use.

In general, ultrasound penetration gets weaker with depth. TGC can be used to compensate for

this eect.

The product provides eight TGC sliders for varying depths, allowing you to adjust Gain by area.

Among the eight sliders, the top slider represents the shallowest area, while the lower sliders

represent the deeper ones.

Move the slider to the right to increase Gain, brightening the image.

When the TGC preset is selected, the TGC preset is applied to the system and then the system

is switched to diagnosis mode. The user can adjust TGC as needed, and press Save to save it for

use.



Focus

Use the Focus switch on the control panel to adjust the location of the focus.



Depth

Use the Depth switch on the control panel to adjust the image scanning depth. The allowable

range for adjustment varies depending on the probe type.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 281 282

OSCAR 23 Apr 2025 | 08:21:36

Samsung HS50 Manual de usuario Pagina 33