Samsung SHR-4080P Manual de usuario descargar pdf (Pagina 36)

5-22

● Sensitivity

Determines Motion sensing sensitivity. Sensitivity grade consists of Low ➝

Medium ➝ Very High in the ascending order.

● Alarm-Out

Selects Alarm-Out scope when Motion occurs.

At this moment, this supports 5 Alarm Outs. Choose an alarm-out that you want to

synchronize with the current motion channel. Multi-choice is possible.

● Beep-Out

Determines Alarm-Out Duration. Alarm-Out continues for the determined duration.

Off/ 3sec/ 5sec/ 10sec/ 20sec/ 30sec/ 1min/ 2min

Video Loss

SHR-4080P USER’S MANUAL

5-21

Motion Detecting

● M.D State

Off : Motion Detection does not operate

On : Motion Detection starts operation.

● Area

Select the Motion Detection zone. It is composed of 45x48 sized Block. You are

forbidden to determine 4 block rows(Up/Down/Left/Right) to allow them to be

displayed in all monitors.

❿ Select All : Selects the whole area.

❿ Select One : Selects a block every time. Selection is done by a toggle system.

❿ Select Quarter : Split the whole area into 4 pieces, which enables selecting a

fourth of the whole area.

❿ Clear All : Cancels the whole area.

❿ Save & Exit : Saves and exits.

❿ Exit : Exits without saving.

● Video Loss State

Off : Video Loss does not operate.

On : Video Loss starts operation.

● Alarm-Out

Selects Alarm-Out scope when the current Video Loss occurs.

At this moment, this supports 5 Alarm Outs. Choose an alarm-out that you want to

synchronize with the current motion channel. Multi-choice is possible.

● Beep-Out

Determines Alarm-Out Duration. Alarm-Out continues for the determined duration.

Off/ 3sec/ 5sec/ 10sec/ 20sec/ 30sec/ 1min/ 2min

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 88 89

Sin comentarios

Samsung SHR-4080P Manual de usuario Pagina 36