Samsung SHR-4080P Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 89
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
5-14
Screen Setup
SHR-4080P USER’S MANUAL
5-13
PTZ Device
ID
PTZ Camera ID from 0 to 255
Protocol
A protocol supported by PTZ Camera
The following protocols are now being supported.
Samsung/ Vicon/ Panasonic/ AD/ Philips/ Erna/ PelcoD/ PelcoP/Vcltp/ Diamond/
Kalatel
Baudrate
Baudrate supported by PTZ Camera, 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400
Parity
Defines one among None, Even, and Odd.
Data
Defines either 7 or 8.
Stop
Defines either 1 or 2.
Serial Mode
Defines either Half Duplex or Full Duplex.
This is a window to adjust Brightness/Contrast/Color for the camera image of each
channel. Put the cursor on the channel that you want to adjust and set up
Brightness/Contrast/Color. Once selected, the channel appear in the PIP area on
the right. Press the or key to adjust the value from 0 to 100.
If you select CH , all the channel values will become the same as the finally
selected channel value.
Default resets the current channel to the basis value of 50.
Caution
Caution
The above items shall be aligned with the PTZ Camera setup condition.
For the details, please refer to Users Manual of the PTZ Camera manufacturer.
Note
Note
[Screen Setup Change]
During backup or recording process, the Screen Setup information remains
unchanged.
Be sure to stop backup or recording process before you change the information.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 88 89

Comentarios a estos manuales

Sin comentarios