Samsung SONOACE R7 Manual de usuario descargar pdf (Pagina 244)

5-70

Operation Manual

 Auto IMT (Optional)

This function allows you to take IMT measurement easily and quickly.

NOTE: Auto IMT is available only under the following conditions:

X

Probe: Linear Probe

X

Application: Vascular

X

Diagnosis Mode: 2D, C or PD Mode

Auto IMT Screen

 Risk Color Bar

It is shown in colors based on the IMT thickness. If the thickness is <= 0.5 mm, the entire bar is shown in

green. If the thickness is >= 1.1 mm, the entire bar is shown in red. For a thickness between these values,

it is shown in the corresponding color.



Rular and Range Bar

Use the

Trackball

and

Set

button to specify the location and range at which IMT will be measured.

X Rular: The grid unit is 10 mm. This option is used when a vessel is lying laterally. At the measurement

location, press the

Set

button to take IMT measurement at 10 mm interval.

X Range Bar: This option is used when a vessel is not lying laterally, or the length of a specic segment

is measured. Press and hold the

Set

button at the start point, and then drag the

Trackball

to specify

the end point.



Intima and Adventitia Pair

X Between the Near and Far zones, the one with the higher QI is automatically selected as a measurement

value and it is represented by the color of the Risk Color Bar.

X A pair with lower QI is represented in dark sky blue.

X Press Change to move the Near and Far zones that are automatically selected with QI. The measurement

value and color presentation are also changed. However, if QI is 0, it will not be changed.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 319 320

Sin comentarios

Samsung SONOACE R7 Manual de usuario Pagina 244