Samsung SCR-3000 Manual de usuario descargar pdf (Pagina 92)

9-2

Trouble Check Points

• Abnormal recording and playing after con-

nected to the Multiplexer

• No voice during play

• The screen trembles vertically during play.

• The LIVE screen is distorted.

• The remote control does not work.

– Check the connection between Multiplexer image

output port and system image signal input port and

between Multiplexer image signal input port and

system image signal output port.

– Check the connection between system trigger output

port(Trigger Out) and Multiplexer.

– For the details of the Multiplexer, please refer to the

Multiplexer User's Manual.

– If the AUDIO RECORD in the RECORD MODE

SETUP menu is set to OFF, only images will be

recorded. You should set it to ON to record both

image and voice.

– No voice will be supplied to the Still screen or Play

mode at high or low speed.

– Screen trembling often occurs during playing at high

or low speed, which is a normal symptom.

– Appropriate input signals need to be connected for

each model. Connect NTSC signals to the SCR-

3000N/SSC-Dual model and PAL signals to the

SCR-3000P model, otherwise video output may be

disrupted.

– Make sure that the path between the remote control

and the IR sensor is not obstructed. Also, check the

angle of the remote control with respect to the IR

sensor and the distance between the remote control

and the IR sensor.

– Make sure the remote control's batteries have

sufficient power.

1 2 ... 87 88 89 90 91 92 93 94

Sin comentarios

Samsung SCR-3000 Manual de usuario Pagina 92