Samsung SCR-3000 Manual de usuario descargar pdf (Pagina 59)

5-9

DIGITAL VIDEO RECORDER

TIMER ARCHIVE

The following illustration shows the initial settings of the TIMER ARCHIVE menu.

The Timer Backup function allows you to set the system to automatically back up the data

that is recorded on the HDD to a video tape while you are away from the system. You can

set the system to back up the desired type of event on the desired day of the week and time

at the desired sampling rate. First set TIMER ARCHIVE to ON. Next, select all event types

you want to back up by setting them to [O]. For example, a backup will not be performed,

even if an alarm event occurs during the set time, unless ALARM EVENT is set to [O]. Set

ARCHIVE SCHEDULE by selecting one from the following: SUN, MON, TUE, WED,

THU, FRI, SAT, MON-FRI, MON-SAT, and DAILY. Enter the backup start and end times

into FROM and TO fields respectively. Finally, set the picture sampling rate to the desired

value between 1/1 to 1/16.

To cancel the TIMER ARCHIVE you have set, press the STOP(

) button for 3 seconds. The

TIMER ARCHIVE will pause for 5 seconds. However, if you do not make any action for 5

seconds, the system will reset to the Timer Archive after 5 seconds have elapsed. To com-

pletely cancel the TIMER ARCHIVE, enter the menu within 5 seconds and set the

TIMER ARCHIVE to OFF.

Because TIMER ARCHIVE is an automatic backup for the data that will be recorded, any

data that has already been recorded will not be backed up. The following illustrates the

timeline of TIMER ARCHIVE.

TIMER ARCHIVE

TIMER ARCHIVE OFF

SELECT EVENT RECORD [X]

ALARM [X]

MOTION [X]

DAY SUN

FROM 12:00:00

TO 12:00:00

SAMPLING RATE 1/1

MOVE=[/❷/

➛

❿

] SELECT=[ ] EXIT=[MENU]

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 93 94

Sin comentarios

Samsung SCR-3000 Manual de usuario Pagina 59