Samsung SCR-3000 Manual de usuario descargar pdf (Pagina 65)

6-1

DIGITAL VIDEO RECORDER

Basic Record

① CURRENT IMAGE RECORD

Press the RECORD( ) button to record current image. If doing so, the light of the

RECORD( ) button turns on and record starts while following message appears on

the screen. Settings related with record are done in the RECORD MODE SETUP menu.

If the incoming video signal is disconnected during recording, recording will be stopped.

But, if the incoming video signal is reconnected, the system recognizes this and start to

record again. In addition, when pressing RECORD( ) button without connecting any

video signals to the input port, the following Message is shown on the screen and the system

will not carry out the recording function.

Note

- Recording is possible both when the system is in the Live screen mode or in the

playback mode. However, whereas the Live screen currently showing will be

recorded when the system is in the Live screen mode, the video that is currently

being input separate from the screen currently being played will be recorded when

the system is in the playback mode.

- While the user is in the menu, pressing the RECORD( ) button will not start the

recording. To start the recording, first exit the menu.

2003-06-01 12:00:00

RECORD ON

2003-06-01 12:00:00

NO VIDEO INPUT

REC

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 93 94

Sin comentarios

Samsung SCR-3000 Manual de usuario Pagina 65