Samsung UM 20A1(B1)E3 Guía de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 166
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
32 www.xilinx.com Spartan-3E FPGA Starter Kit Board User Guide
UG230 (v1.2) January 20, 2011
Chapter 4: FPGA Configuration Options
R
Programming Platform Flash PROM via USB
The on-board USB-JTAG circuitry also programs the Xilinx XCF04S serial Platform Flash
PROM. The steps provided in this section describe how to set up the PROM file and how
to download it to the board to ultimately program the FPGA.
Generating the FPGA Configuration Bitstream File
Before generating the PROM file, create the FPGA bitstream file. The FPGA provides an
output clock, CCLK, when loading itself from an external PROM. The FPGA’s internal
CCLK oscillator always starts at its slowest setting, approximately 1.5 MHz. Most external
PROMs support a higher frequency. Increase the CCLK frequency as appropriate to reduce
the FPGA’s configuration time. The Xilinx XCF04S Platform Flash supports a 25 MHz
CCLK frequency.
Right-click Generator Programming File in the Processes pane, as shown in
Figure 4-10. Left-click Properties.
Figure 4-9: iMPACT Programming Succeeded, the FPGA’s DONE Pin is High
UG230_c4_10_022406
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 165 166

Comentarios a estos manuales

Sin comentarios