Samsung GN7A2IFXD Manual de usuario descargar pdf (Pagina 14)

Gas Conversion

■ Take precautions on the operations and adjustments to be carried out when

converting from one gas to another.

■ All work must be carried out by a qualied technician.

■ Before you begin, turn off the gas and electricity supply to the appliance.

Change the injector of the burners.

(Also same method on Triple crown burner)

Remove the pan support, Burner lid and Flame spreader.

Unscrew the injector using a 7 mm box spanner and replace it with

the stipulated injector for new gas supply. ( see table 1. Page 27.)

Carefully reassemble the all components.

After injectors are replaced, it is advisable to strongly tighten the

injector in place.

Adjusting of the taps of the cooking hob burners for

reduced consumption

➀ Turn the taps down to minimum.

➁ Remove the control handles from taps.

➂ Adjusting the by-pass screw.

- For converting G20 into G30, the screw must be

screwed down fully tight.

- At this stage, light up the burners and turn the

control handles from max position to minimum

position to check ame stability.

- For converting G30 into G20, please change all

valve into new one.

➃ Replace the control handles on the taps.

Injector

Control handle

Tap

Sealing ring

Tap

by-pass screw

■

Do not dismantle the tap shaft : in the event of a malfunction, change the whole tap.

■ Before placing the burners back on the top place, make sure that the injector is

not blocked.

■ A full operational test and a test for possible leakages must be carried out after

gas conversion. (such as soap water or gas detector)

■ After completing conversion, a qualied technician or installer has to mark “V”

on the right gas category

to match with the setting

in rating plate.

Remove the previous

setting “V” mark.

GN7A2IFXD S/N:

G20/20mbar 220-240V 50/60Hz, Pmax 1W

∑Qn G20: 11.3kW G30: 807g/h G31: 781g/h

G20-20mbar

G30/29mbar

G31/37mbar

GB Cat.: II2H3+

0063

Burner Features

Nominal heat input and ow rates see below at 15˚C at 1,013 mbar. (Table 1)

COUN-

TRY

TYPE OF

GAS

BURNER

Triple

Crown

(3.8KW)

Rapid Semi-rapid Auxiliary

Total

POSITION Max Min Max Min Max Min Max Min

GB,IT

FR,HU

BE,LT

NL,PT

ES,CZ

G-30

BUTANE

29 mbar

Injector make

(1/100 mm)

98 85 65 50 -

Nominal heat input

(Kw) (

)

3.8 1.15 3.0 0.74 1.75 0.43 1.0 0.37 11.3

Nominal ow rates

(g/h)

267 193 211 53 120 31 71 25

G-30

BUTANE

37 mbar

Injector make

(1/100 mm)

93 80 62 47 -

Nominal heat input

(Kw) (

)

3.8 1.29 3.0 0.81 1.75 0.47 1.0 0.38 11.3

Nominal ow rates

(g/h)

259 185 203 58 125 33 71 25

GB,IT

FR,BE

LT,PT

ES,CZ

G-31

PROPANE

37 mbar

Injector make

(1/100 mm)

98 85 65 50 -

Nominal heat input

(Kw) (

)

3.8 1.12 3.0 0.71 1.75 0.41 1.0 0.33 11.3

Nominal ow rates

(g/h)

254 177 199 49 118 28 68 23

GB,IT

FR,BE

LT,PT

PL,ES

CZ,SK

G-20

NATURAL

20 mbar

Injector make

(1/100 mm)

135 119 97 72 -

Nominal heat rating

(Kw) (

)

3.8 1.38 3.0 1.14 1.75 0.63 1.0 0.45 11.3

Nominal ow rates

(L/h)

361 129 271 79 166 54 91 30

G-20

NATURAL

25 mbar

Injector make

(1/100 mm)

128 110 91 68 -

Nominal heat input

(Kw) (

)

3.8 1.59 3.0 1.33 1.75 0.57 1.0 0.49 11.3

Nominal ow rates

(L/h)

350 129 271 79 166 54 91 30

G-25

NATURAL

25 mbar

Injector make

(1/100 mm)

137 122 94 72 -

Nominal heat input

(Kw) (

)

3.8 1.2 3.0 0.6 1.75 0.49 1.0 0.28 11.3

Nominal ow rates

(L/h)

421 132 332 66 193 54 110 31

Burner Calibrated orice 1/100mm

Auxiliary 31

Semi-rapid 34

Rapid 43

Triple-Crown 60 65

- Aeration adjustment none

1 2 ... 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

Samsung GN7A2IFXD Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Samsung GN7A2IFXD