Samsung WF457ARGSGR/A2 Manual y guía del usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 240
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
62_ Maintaining your washer
Maintaining your washer


Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washer.
1. Press the Power button.
2. Select the Pure Cycle.
• Once the Pure Cycle is chosen, the only function that can be set is Delay Start.
3. Press the Start/Pause button.
• When you press the Start/Pause button, the Pure Cycle begins.
• UsingthePureCycle,youcancleanthedrumwithoutusingacleaningagent.
• NeverusethePureCyclewhenlaundryisinthewasher.Itmaycausedamagetothe
laundry or a problem with the washer.
• 
 (When using a
powder-type cleaning agent , remove the liquid detergent compartment.)

• Ifcleaningthetub(drum)isrequired,thePureCycleautonoticationscreenappears.
When this remove the laundry from the washer, turn the power on, and clean the drum
by running the Pure Cycle.
• IfyoudonotrunthePureCycle,thePureCycleautonoticationscreenwillbeshown
again after two washes. Not running the Pure Cycle at this point will not cause a problem
with the washer.
• AlthoughthePureCycleautonoticationscreenappearsonceamonthorso,the
frequency may dier depending on the number of times the washer is used.
CAUTION
WF457ARG-03153A-09_EN.indd 62 2014/4/30 15:17:49
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 239 240

Comentarios a estos manuales

Sin comentarios