Samsung AQB24J2WC Manual de instalación descargar pdf (Pagina 7)

ENGLISH

E-

Installing the Air conditioner

Fixing the Installation Plate

Before fixing the installation plate to the wall or window frame, you must

determine the position of the inch(65mm)hole through which the cable,

pipe and hose pass to connect the indoor unit to the outdoor unit.

When facing the wall, the pipe and cable can be connected from the:

On delivery, there may be inert gas inside the indoor unit.

You should purge the gas from the indoor unit before connecting the assembly pipe.

1 Determine the position of the pipe and drain hose hole as seen in the

picture and drill the hole with an inner diameter of inch(65mm) so that it slants

slightly downwards.

2 If you fix the indoor unit to a... Follow Steps...

Wall 3.

Window frame 4 to 6.

3 Fix the installation plate to the wall giving attention to the weight of the indoor unit.

➢ If you mount the plate on the concrete wall with anchor bolts,

the anchor bolts must not be projected by more than inch(20mm).

4 Determine the positions of the wooden uprights to be attached to the window frame.

5 Attach the wooden uprights to the window frame giving attention to the weight of the

indoor unit.

6 Attach the installation plate to the wooden uprights using tapping screws as seen

in the picture.

Unscrew the caps at the end of each pipe.

Result

: All inert gas exhausts from the indoor unit.

◆ Right

◆ Left

◆ Underside (right)

◆ Rear

(65)0

Pipe Hole

Installation plate

Unit : inch(mm)

2(74)

2 (74)

1(47)

➢ To prevent dirt or foreign substance from getting into the pipes during

installation, do NOT remove the caps completely until you are ready to

connect the pipes.

AQB18J6WC_IM_E_25864 3/24/06 10:52 PM Page 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sin comentarios

Samsung AQB24J2WC Manual de instalación Pagina 7