Samsung SF-5100P Guía de usuario descargar pdf (Pagina 147)

7.4

Troubleshooting

Problem

Black staining

Possible cause and remedy

• There is a paper quality problem. Use only paper that meets

printer specifications.

• A toner cartridge from another printer has been installed.

Always use the same toner cartridge with the same printer.

Using a cartridge that has already been used in another

printer may not give satisfactory results.

Missing characters

• The paper may be too damp. Try printing with a different

batch of paper. Do not open packages of paper until

necessary so that the paper does not absorb too much

moisture from the air.

Back of printout dirty

• The transfer roller may be dirty. Print a few blank pages to

clean the transfer roller.

Incorrect fonts

• True type fonts may be disabled (Windows 3.x). Use the

Fonts dialogue box in the Control Panel to enable True

type fonts.

Faded graphics

• Toner may be low. Remove the toner cartridge and shake it

gently to evenly distribute the toner. Then replace the toner

cartridge. Have a spare toner cartridge in preparation for the

toner running out.

Background scatter

• The paper may be too damp. Try printing with a different

batch of paper. Do not open packages of paper until

necessary so that the paper does not absorb too much

moisture from the air.

• Printing over uneven surfaces. If printing onto envelopes,

change your printing layout to avoid printing over areas that

have overlapping seams on the reverse side.

Character voids

• The paper may be too dry. Try printing with a different batch

of paper.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 155 156

Sin comentarios

Samsung SF-5100P Guía de usuario Pagina 147