Samsung SCC-805P Instrucciones de operaciones descargar pdf (Pagina 5)

Operating InstructionsOperating Instructions

Connecting Auto Iris Lens Connector

Prepare the Auto Iris Lens Connector, which is

supplied along with the camera.

Connect the cable of the control cable, whose

covering is stripped, to the Auto Iris Lens

Connector as shown below.

Pin Number DC Control Type Video Control Type

1 Damp (–) Power (+9V)

2 Damp (+) Not used

3 Drive (+) Video signal

4 Drive (–) GND

Rib

Pin1

Pin2

Pin3

Pin4

Mounting the Lens

Loosen a screw fixing the Flange Back Adjustment

Ring by turning it counterclockwise and turn the

Adjustment Ring to the “C” direction

(counterclockwise) until it stops. Failure to do so

may result in a damage caused by a bump of the

lens against the image sensor part in the camera

when mounting the lens.

Auto Iris Control Cable

LENS

VIDEO

C direction

00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 6

1 2 3 4 5 6 7 8 9 10 ... 23 24

Sin comentarios

Samsung SCC-805P Instrucciones de operaciones Pagina 5