Samsung SRP-275 Manual del operador descargar pdf (Pagina 78)

5-1335-132

ESC O

[Name] Canceling the perforation skip

[Format] ASCII ESC O n

Hex 1B 4F n

[Description] This command cancels perforation skipping operation.

ESC C n

[Name] Setting the page length

[Format] ASCII ESC C n

Hex 1B 43 n

[Range] 14 ≤ n ≤ 120

[Description] Sets the 1-page length to n-lines.

Also it initiates a paging operation, with 3 space lines placed at the beginning

and end of a page.

(The first 3-line spacing is initiated when this command is verified.)

[Notes]

- If an out-of-range value is specified for "n", it is set to 66.

- The actual number of printable lines is "n-6".

[Default] n = 66

ESC f <1>

[Name] Form feed (Changing the page)

[Format] ASCII ESC f <1>

Hex 1B 66 01

[Description] This command searches for the beginning of the next page after printing the

data in the print buffer.

ESC 3

[Name] Specifying the standard line feed width

[Format] ASCII ESC 3

Hex 1B 33

[Description] This command sets the line feed width as follows.

Character type : 1/6 inch

Graphic type : 2/9 inch

ESC C n

[Name] Setting the page length

[Format] ASCII ESC C n

Hex 1B 43 n

[Range] 1 ≤ n ≤ 127

[Description] Sets the 1-page length to n-lines.

ESC N n

[Name] Specifying the perforation skip

[Format] ASCII ESC N n

Hex 1B 4E n

[Range] 1 ≤ n ≤ 126

[Description] This command feeds (skips) the lines specified with n without printing.

However, you cannot specify beyond the length of one page.

CONTROL COMMANDS LIST

CHAPTER 5

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 109 110

Comentarios a estos manuales

Sin comentarios

Samsung SRP-275 Manual del operador Pagina 78

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Samsung SRP-275