Samsung GN752CFX Manual de usuario descargar pdf (Pagina 7)

ELECTRICAL CONNECTION

Your hob is delivered with a power cable (type

H05V2V2F - T90, 1 mm

cross-section) with

three conductors (phase + ground + neutral). It

must be connected to a 220-240 V

monophase grid via a standardised CEI 60083

electrical outlet with phase + ground + neutral

or an all-pole cut-off device with a minimum

distance between contact openings of 3.5 mm.

The plug of the electrical outlet must be

accessible after installation.

Warning

The safety wire (green-yellow) is connected

to the appliance's ground terminal and must

be connected to the ground lead of the

electrical set-up. The fuse in your set-up must

be 10 amperes. If the power cable is damaged,

it must be replaced by a cable or a special kit

available from the manufacturer or its After-

Sales Service Department.

Tip

Using a gas cooking appliance results in the

generation of heat and humidity in the location

where it is installed.

MMaakkee ssuurree tthhaatt yyoouu kkiittcchheenn

iiss wweellll vveennttiillaatteedd::

keep natural ventilation

orifices in your home open or install a

mechanical ventilation device (mechanical

ventilation hood). Intensive, prolonged use of

the appliance may require additional ventilation;

you can, for example, open a window or provide

more effective ventilation by increasing the

setting of the mechanical ventilation system, if

you have one. (A minimum air flow of 2 m

/h per

kW of gas power is required.)

Example: 70 cm, 5 gas burners +

Total power: 3.1+0.85+3.8+2.25+1.55 = 11.55 KW

11.55 KW x 2 = 23.10 m

/h of

minimum air flow

11 //

INSTALLING YOUR APPLIANCE

Place your hob in the opening of the support

cabinet, carefully pulling the table toward you.

Reposition the burner heads, burner covers

and pan supports on the hob.

Connect your hob to the gas supply (See

"Gas Connection" chapter) and to the power

supply (See "Electrical Connection" chapter).

If you wish, you can immediately stabilise the

hob with the four mounting brackets and

screws supplied with the hob

(Fig. 02)

attaching them to the four corners of the

housing.

YYoouu mmuusstt uussee tthhee hhoolleess pprroovviiddeedd ffoorr

tthhiiss ppuurrppoossee,, aass sshhoowwnn iinn tthhee ddiiaaggrraamm aabboovvee

(Fig. 01)

SSttoopp ssccrreewwiinngg wwhheenn tthhee mmoouunnttiinngg bbrraacckkeett

ssttaarrttss ttoo bbeeccoommee mmiisssshhaappeenn..

DDoo nnoott uussee aa ssccrreewwddrriivveerr..

Fig. 01

Fig. 02

Mounting brackets

Underside view of

the housing

••

TIPS FOR FLUSH MOUNTING

Mounting brackets

••

Cabinet

RROOSSSS

SSEECCTTIIOONN OOFF CCAABBLLEE

H05V2V2F -T90 cable

Cross-section of

wires in mm

Fuse

222200--224400 VV

-- 5500 HHzz

3 conductors, including

one ground wire

10 A

99640611_A_ML.qxp 06/09/2006 08:12 Page 43

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comentarios a estos manuales

Sin comentarios

Samsung GN752CFX Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Samsung GN752CFX