Samsung HLS5686CX-XAA Manual de usuario

Owner’sInstructionsRegister your product atwww.samsung.com/global/registerHL-S5686CDLP TVBP68-00620A-00Contact SAMSUNG WORLD-WIDEIf you have any quest

English-10S-VIDEO (AV IN 3)S-Video input for external devices with an S-Video output.AUDIO-R/L / VIDEO (AV IN 3)Video and audio inputs for external de

English-100Possible SolutionThis message appears if you have connected a 1394 device or equipment other than a supported device (D-VHS, DTV, STB, AV-H

English-101Replacing the LampAppendix• Why do I need to replace the lamp?The lamp used in a DLP TV has a limited lifespan. For the best screen quality

English-102• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.1Unplug TV, then use a screwdriver to remove the screws.2Remo

English-103Identifying ProblemsIf the TV seems to have a problem, first try this list of possible problems and solutions.If none of these troubleshoot

English-104• Do not put the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near appliances with electric motors that create

English-105Design and specifications are subject to change without prior notice.SpecificationsModel NameDimensions (WxDxH)WeightTV SystemChannelCompon

This page is intentionallyleft blank.BP68-00620A-00Eng 9/14/06 5:28 PM Page 106

This page is intentionallyleft blank.BP68-00620A-00Eng 9/14/06 5:28 PM Page 107

English-11Remote ControlYou can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly

English-121. Place the wires from the twin leads under the screws on a 300-75Ωadapter (not supplied). Use a screwdriver to tighten the screws.2. Plug

English-13After you have made this connection, set the A/B Switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to vi

English-14Connecting a VCRThese instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instr

English-15Connecting a CamcorderThe side panel jacks on your TV make it easy to connect a camcorder to your TV.They allow you to view the camcorder ta

English-16Connecting a DVD Player/Set-Top Box via DVIThis connection can only be made if there is a DVI Output connector on the external device.1. Con

When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” cannot be adjusted.English-17Connecting a Digital Audio SystemThe rear p

English-18Turning the TV On and OffPress the POWER button on the remote control.You can also use the (Power) button on the front of the panel.Plug &a

English-196Press the ENTER button. Press the or buttons to select “Auto” or “Manual”,then the ENTER button. Switches the Daylight Saving Time functi

English-2A Guide to Digital TV© 2006 Samsung Electronics Co., Ltd. All rights reserved.• What is Digital Television?Digital television (DTV) is a new

English-20Dynamic Menus and On-Screen DisplaysThe on-screen menu system allows you to control the settings of your TV. Access the on-screen menu syste

Navigating Menus by Using the Menu MapUsing the Menu Map of the main menu enables you to select a function quickly. 1Press the MENU button. The main m

English-22Selecting a Menu LanguageWhen you start using your television for the first time, you must select the language which will be used for displa

English-23Before your television can begin memorizing the available channels, you must specify the type of signal source that is connectedto the TV (i

English-244Press the or button to select the Antenna connection, then press the ENTERbutton.When selecting Cable TV system:Press the ENTERbutton to

English-25For example, for channel 7-1, press “7”,then “-”, then “1”.HD indicates the TV is receiving a Digital High Definition signal.SD indicates th

English-26Setting Up the Remote to Operate Your VCR1.Turn off your VCR.2.Press the VCR button on your TV’s remote control.3.Press the SET button on yo

English-27Setting Up the Remote to Operate Your DVD1.Turn off your DVD.2.Press the DVD button on your TV’s remote control.3.Press the SET button on yo

English-28BrandSAMSUNGADMIRALAIWAAKAIAUDIO DYNAMICSBELL&HOWELLBROKSONICCANDLECANONCITIZENCOLORTYMECRAIGCURTIS MATHESDAEWOODBDIMENSIADYNATECHELECTR

English-29BrandANAMAUDIOVOXAUDIOLOGICANABAAPEX DIGITALAIWABROKSONICBLAUPUNKTB&KCURTIS MATHESCYBER HOMECLARIONCIRRUSCYBER HOMECINEVISIONDAEWOODENON

English-3CableCARD and Digital Cable Ready TVs are the products of a new digital cable standard. This new standard is called OpenCable and it is a con

English-30BrandALPHASTARANAMCHANNEL MASTERCROSSDIGITALCHAPARRALDIRECT TVDAEWOODISH NETWORK SYSTEMDISHPRODRAKEDX ANTENNAECHOSTAREXPRESSVUGOIGEGENERAL I

English-31Setting the ClockSetting the clock is necessary in order to use the various timer features of the TV.Also, you can check the time while watc

English-321Press the MENU button. Press the or button to select “Setup”,then press the ENTER button.2Press the or button to select “Clock”, then p

English-33Setting the On/Off Timer1Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.2Press the or button

English-34The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).1Press the MENU button. Press the or button to

Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (air or cable).Vie

English-36This feature enables you to name the input source you have connected.Assigning Names to External Input Mode1Press the MENU button. Press the

Selecting Your Favorite ChannelsYou can store your favorite channels for each available input source (such as TV and CATV).Preset : To use the Channel

English-38ChannelEnterChannelAntennaAuto ProgramChannel ManagerFine TuneSignal StrengthLNAAirOnReturnChannelEnterChannel ManagerAllAddedFavoriteDefaul

Adding and Erasing ChannelsPreset : To use the Channel Manager function, first run Auto Program (See pages 23~24).1Press the MENU button. Press the o

English-41. Is the antenna I use for existing TV reception good enough for DTV?Over-the-air (OTA) digital TV broadcasting uses the same channels as an

English-40Labeling the ChannelsUse this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, and etc.)

Fine Tuning Analog ChannelsUse fine tuning to manually adjust a particular channel for optimal reception.1Press the MENU button. Press the or button

English-42Checking the Digital-Signal StrengthUnlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channe

Picture ControlYou can select the type of picture which best corresponds to your viewing requirements.Picture Control1Press the MENU button. Press the

English-44Customizing the Picture SettingsYou can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “

5Press the ENTER button to return to “Mode”.Press the or button to select “Color Tone”, then press the ENTER button.6Press the or button to select

English-46Changing the Picture SizeYou can select the picture size which best corresponds to your viewing requirements.1Press the MENU button. Press t

Setting the My Color Control ModeMy Color Control allows you to adjust colors according to your preference, by adjusting skin, sky, and grass tones us

English-481Press the MENU button. Press the or button to select “Picture”, then press the ENTER button.2Press the or button to select “My Color Co

English-49Using the Color Weakness Enhancement FeatureThis feature adjusts the Red, Green or Blue color to compensate for the user’s particular color

ContentsGENERAL INFORMATIONViewing Position... 7List of Features ...

English-50Digital Noise ReductionIf the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help red

English-51DNIe (Digital Natural Image engine)This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view th

English-52Setting the Film ModeYou can automatically sense and process film signals from all sources and adjust the picture for optimum quality.1Press

English-53Setting the Blue Screen ModeIf no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy pictu

English-54Sound ControlYou can control and customize the sound levels and settings of the TV with the remote control.1Press the MENU button. Press the

English-551Press the MENU button. Press the or button to select “Sound”, then press the ENTER button.2Press the or button to select “Mode”, then p

English-56Setting up DNSe (Digital Natural Sound engine)DNSe enhances the sound quality, automatically controls output, and prevents sound distortion.

English-57Auto VolumeEach broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is ch

English-58Choosing a Multi-Channel Sound (MTS) trackThe digital-TV transmission system is capable of simultaneous transmission of many audio tracks (f

English-59Choosing a Multi-Channel Sound (MTS) trackDepending on the particular program being broadcast, you can listen to Stereo, SAP, or Mono.1Press

ContentsUSING THE OCAP (OPENCABLE APPLICATIONPLATFORM) DATA SERVIEConnecting CableCARD... 78Using the CableC

English-60Selecting the Internal MuteWhen using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On t

Setting the On/Off MelodyA melody sound can be set to come on when the TV is powered On or Off.1Press the MENU button. Press the or button to select

English-62Setting the Function HelpDisplays Help on the menu functions. The Help appears at the top of the screen.1Press the MENU button. Press the o

English-63Setting the Data ServiceIt is used to decide whether or not to use the Data Service. When it is set to “Off”, all the functions relating to

Menu Transparency LevelAdjusts the transparency of the menu screen.1Press the MENU button. Press the or button to select “Setup”, then press the ENT

English-65When connecting to a game console such as PlayStationTMor XboxTM, you can enjoy a more realistic gaming experience by setting the Game Mode

Using the V-ChipAccess to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen m

English-67How to Enable/Disable the Rating Controls1Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.Press

How to Set up Restrictions Using “TV Parental Guidelines”The parental restrictions can be set up using either of two methods: The “TV Parental Guideli

English-69How to Set up Restrictions Using “MPAA Rating”The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and it

Viewing PositionTo optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time,

Important Notes About Parental LocksExplanation of the MPAA and TV (FCC) Rating Systems:TV (FCC) Age-Based RatingsTV-YAll children. The themes and ele

English-71How to Set up Restrictions Using Canadian English1Press the MENU button. Press the or button to select “Setup”, then press the ENTER butt

How to Set up Restrictions Using Canadian French1Press the MENU button. Press the or button to select “Setup”,then press the ENTER button.Press the

English-73Using the V-Chip for Digital channels1Press the MENU button. Press the or button to select “Setup”,then press the ENTER button.Press the

Viewing Closed Captions (On-Screen Text Messages)1Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.2Press t

English-75SetupEnterCaptionCaptionCaption ModeDigital Caption OptionsReturnOffOnSetupEnterSetupLanguageClockTimerGame ModeV-ChipCaptionMenu Transparen

6Press the or button to select “Size”, then press the ENTER button.Press the or button to select the desired item in the Size menu,then press the

1Press the MENU button. Press the or button to select “Application”, then press theENTER button.3Press the EXIT button to close the License applicat

English-78Using the OCAP (OpenCable Application Platform) Data ServiceTV Rear PanelPlease insert the card as shown.You must obtain a CableCARD from a

English-79Using the CableCARD1Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.2Press the or button to s

English-8List of Features Easy-to-operate remote control Dynamic, easy to navigate menus Easy-to-use on-screen menu system you can access from the

English-80Channel List Reorganization1Press the MENU button. Press the or button to select “Setup”,then press the ENTER button.2Press the or butto

English-811Press the MENU button. Press the or button to select “Application”, then press theENTER button.3Press the or button to select a Data Ap

English-82What’s D-Net?1Connect the IEEE1394 Cable from the jackof the component with IEEE1394 capability,such as a Set-Top Box or a Digital VCR tothe

English-83When Connecting D-Net (IEEE1394) Compatible devicesThe last device in the chain should not be looped back to the TV as the TV may not be abl

English-84Connection OptionsThere are two different connection options for connecting D -Net (IEEE1394) compatible devices. Select the most suitable o

English-854-Pin and 6-Pin ConnectorsTwo different types of connectors are used for IEEE1394 terminals and cables, a 4-pin and a 6-pin.The 4-pin connec

English-86Selecting a D-Net devicePrior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List.1Connect the relevant D-

English-871Press the MENU button. Press the or button to select “Application”, then press theENTER button.3Press the or button to select a D-Net (

English-88The D-Net control panelSelect an IEEE1394 device from the D-Net device list. The TV will then display the D-Net control panel.This panel all

English-89Control Panel ( )Button Name To do thisReturnTargetFile ListDisplay the AV-HDD file list.Move to the D-Net device list.Shows a list of recor

English-9Viewing the Control Panel SPEAKERS(POWER)Press to turn the TV on and off. REMOTE CONTROL SENSORAim the remote control towards this spot on

English-90Control Panel Images for Each DeviceDTV Control Panel ImageCable STB Control Panel ImageAV-HDD Control Panel ImageWhen the Power is off.AV-H

Operating Tips1) When the screen is switched to the TV program. - When you select the first button, the DTV button, in the Device List, it switches t

English-9210) When multiple devices are connected, some devices may appear and then disappear periodically in the Device List. Because some devices ma

Recording TipsIn this case, the selected file is automatically played and displayed on the TV screen and the target device automatically starts record

English-94Tips on stopping recording1In general, you can instantly evaluate the currentrecording device through the Target List. If you select a devic

English-95File List1Press the D-Net button on the remote control.3Press the or button to move to the File List buttonand then press the ENTERorbutton

English-966To move to the list on the next page, move the cursor to the file at the bottom and press the button; to move tothe previous page, move t

Troubleshooting (D-Net)Possible SolutionOnly DTVs, STBs, AV-HDDs, D-VHSs and MPEG camcorderIEEE 1394 devices are controllable.Other devices will displ

English-98Possible SolutionThis message appears when the connection speed of the connected device and the device selected from the Target List are dif

Possible SolutionCheck if the current mode for DTV and STB is set to analog by mistake. For AV-HDD, check if the played content hasreached the end. (S