Samsung AQV10UWEN Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
28
Wall
<20mm
Plastic
Anchor
Fixing the installation plate
2. Fix the indoor unit.
If youx the indoor unit on a wall
(1) Fix the installation plate to the wall giving attention to the weight of the indoor unit.
If youx the indoor unit on a window frame
(1) Determine the positions of the wooden uprights to be
attached to the window frame.
(2) Attach the wooden uprights to the window frame giving
attention to the weight of the indoor unit.
(3) Attach the installation plate to the wooden upright using
tapping screws.
If youx the indoor unit on a gypsum board
(1) Use studnder to nd out locations of the studs.
(2) Fix the plate hanger on two studs.
• Ifyoumounttheplatetoaconcretewallusingplasticanchors,makesurethat
gapsbetweenthewallandtheplate,createdbyprojectedanchor,islessthan
20mm.
• Searchforotherspotsiftherearelessthantwostuds,orthedistancebetweenthestudsaredierentfromthe
plate hanger.
• Fixtheinstallationplatewithoutincliningtooneside.
1. Extend the assembly cable if necessary.
• Donotconnecttwoormoredierentcablestoextendthelength.
Itmaycausere.
• Makesurethatawallcanwithstandtheweightoftheproduct.Ifyouinstalltheproductinaplacewhereitisnot
strongenoughtowithstandtheproductweight,theunitcouldfallandcauseinjury.
Connecting the assembly cable
Whenyouinstalltheunit,makerstrefrigerantconnectionsandthenelectricalconnections.
Connecttheairconditionertogroundingsystembeforeperformingtheelectricalconnection.
Ifunitisuninstalled,rstdisconnectelectricalcables,thenrefrigerantconnections.
Iftheoutdoorunitismorethan5metersawayfromtheindoorunit,youmustextendthecable.
Themaximumlengthofthecableis15(09/10/12)/20(18/24) meters.
• Connectthepowercabletotheauxiliarycircuitbreaker.Ifeverypolefailstoconnectto
thepowersupply,itmustbeincorporatedinawirewithacontactopeningof≥3mm.
Model Power cable Interconnection cable Type GL
09/10/12
- 4G,1.5mm
² H07RN-F 20A
18/24
3G,2.5mm
² H07RN-F
3G,1.5mm² H07RN-F
25A
2G,0.75mm
²H05RN-F
Cable specication
Connecting the cable
Vivaldi MAX_AQV09&12U@@ IB&IM_32450A_E.indd 28 2011-3-7 15:12:16
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 42 43

Comentarios a estos manuales

Sin comentarios