Samsung ML-1750 Especificaciones descargar pdf (Pagina 28)

4-11

Samsung Electronics

SUMMARY OF PRODUCT

Service Manual

3) Paper Feeding, Toner Cartridge Sensing

When paper passes the actuator (feed sensor part), it detects the signal of Photo interrupter, informs the

paper feeding state to CPU, and then sprays the image data after certain time.

If it doesn't detect the feed sensor within 1 sec. after paper is fed, paper Jam0 is occurred (Red and Yellow

will be turned on among the OP panel LEDs), and the fact whether the developer is inserted or not is detect-

ed with the same principle. After the developer is mounted, the actuator is operated. The signal from the photo

interrupter is detected when it is passing the actuator of the sensor part. That is the developer ID sensing.

4) Paper Exit Sensing

It detects paper state whether paper gets out from the set with operation of exit sensor on the engine board

and actuator on the frame. Paper detects the on/off time of exit sensor, and the normal operation or jam infor-

mation is informed to the CPU.

The paper JAM2 is informed. (Red, Yellow LED will be turned on among the OP panel LEDs)

5) Cover Open Sensing

The Cover open sensor is located on the front cover. After the front cover is opened, +24V (DC fan, solenoid,

main motor, polygon motor part of LSU, HVPS), which is supplied to the each unit, is cut off.

The cover-open sensing is operated by the D0 bit of CPU, and the developer ID sensing is operated.

In this case, the red LED among OP panel LEDs will be ON for informing the facts to user.

6) DC FAN / SOLENOID Driving

It is driven by transistor and controlled by D6 bit of CPU.

When it is high, the fan is driving by turning on the TR, and it is off when the sleep mode is selected.

There are two solenoids, and they are driven by paper pick-up and MP signal. Its driving time is 300ms. The

diode protects the driving TR from the noise pulse, which is flown when the solenoid is de-energizing.

7) Motor Driving

The motor driving circuit is formed when the Driver IC is selected in the first place. The A3977 (Motor driver

IC) is used in this case. But, the resistance Rs value of sensing and the voltage value of the V reference can

be changed by motor driving voltage value.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 119 120

Sin comentarios

Modèles	Type de document
AB 1	Manuel de l'utilisateur Harman Kardon AB 1 User's Manual, 2 pages
CA240	Manuel de l'utilisateur Harman Kardon CA240 User's Manual, 11 pages
38	Manuel de l'utilisateur Harman Kardon 38 User's Manual, 1 pages
GPS-310	Manuel de l'utilisateur Harman Kardon GPS-310 User's Manual, 12 pages
HD7325	Manuel de l'utilisateur Harman Kardon HD7325 User's Manual, 12 pages
TA260	Manuel de l'utilisateur Harman Kardon TA260 User's Manual, 15 pages

Samsung ML-1750 Especificaciones Pagina 28