Samsung SSC-12P Manual de servicio descargar pdf (Pagina 37)

Troubleshooting

Samsung Electronics 4-5

1. Noise:

Internal noise may be caused by a foreign substance on the fan or driving device.

ForaDLPTV,theLEDfansandDMDboardfanarevulnerabletonoise.Sometimestheconnectorwirearoundthe

lamporDMDfanmakescontactwiththefan.

When irregular noise occurs for no particular reason, check the inside of the TV for any foreign substances.

The DLP projection TV may cause noise because the physical space is empty inside, causing a resonance at a particular

frequency.Thusalowvibrationisnotamalfunction.

Any ‘creaking’ noise is mostly from the structure of the device itself. A short, harsh noise may occur from a distortion or

malformationduetothermalexpansionbetweenthemetaljoints,screwsandloadedparts,respectively.Anyintermittent

‘creaking’noisecanberemovedbylooseningthescrews.

2. Black Screen (Voice Output):Replace the DMD board

3. AblackscreenwiththeLEDon:ReplacetheDMDBoard.

4. Line Pattern: Regular line patterns occur vertically or horizontally: Replace the DMD board.

5. VoiceDistortion:Replacethemainboard.

6. OutsideLight:Thisisnotaproductmalfunction,butapossibleinstallationorhumanerror.Thisoccurswhentheprojectedlight

from the surrounding illumination reflects onto the screen. This disappears as the TV starts operating and the TV lamp gets

brighter.However,youcanavoidoutsidelightbychangingthepositionoftheTVortheinstallationangle.

Decreasingtheilluminationorchangingtheindoorlightingmaywork.

7. ScreenFlip-over:

Enter Factory mode in DDP3021 and perform H-Flip (flip horizontally) and V-Flip (flip vertically).

Thescreenwillflipoverhorizontallyorvertically.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 101 102

Sin comentarios

Samsung SSC-12P Manual de servicio Pagina 37