Samsung SSA-S2000W Manual de usuario descargar pdf (Pagina 13)

1) Initialization by Master Card

1) Present Master Card on the reader.

2) Press “99” + “ENT”

3) All data will be erased.

2) Hardware Initialization (When the Master card or ID is lost)

1) Open the top case taking out four bolts on the back.

2) As the left picture, make two jumpers short in state of being on power

3) 3 color LED blinking with beep sound indicates success of Initialization

3) Wire Initialization (When the Master card or ID is lost)

1) Main power off.

2) Connect the orange and orange with white stripe wire together and power on.

3) 3 color LED blinking with beep sound indicates the success of initialization.

4) Main power off again.

5) Disconnect orange wire and orange with white stripe wire.

6) Power on.

You may lose all setup data after execute Initialize.

Warning

Master Card

11. Initialization

1 2 ... 8 9 10 11 12 13 14 15

Sin comentarios

Samsung SSA-S2000W Manual de usuario Pagina 13