Samsung SSA-S2000 Manual de usuario Pagina 18
- Pagina / 51
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
18_ reader mode setup
- You can specify the operation mode for the device.
- Once a mode is specifi ed, it will not switch until you perform the initialization.
- You must keep the Master Card in safe for later use as it is required for your change to the device settings.
- If progression is halted for more than one minute during any of the following processes, the operation mode of the reader
will return to the previous state.
READER MODE SETUP (RF ONLY)
No Master Card or Master PIN is ever registered.
If you remember the Master Card or the Master PIN was registered, initialize the product and try again.
When you turn on the product, all of the 3 LED indicators will fl ash with a
beep.
No flashing of the 3 indicators denotes that the reader mode is already
specified.
Press Button
0
and Button
1
in sequence and press
ENT
.
When the mode is specifi ed, only the green LED indicator fl ashes.
Present a card that you want to register as the Master Card to the device.
When the Master Card is registered, only the red LED indicator flashes.
Present cards to register with the device one after another, and the device
will register them with a beep. If you don’t want to register the cards right
now, simply jump to Step 5 above without through Step 4 above.
Present the registered Master Card to the product once again.
The device enters Standby mode with only the orange LED indicator flashing.
1.
•
2.
3.
4.
5.
6.
reader mode setup
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
ÎÎÎ
tGj
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
tGj
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
X Y Z
[ \ ]
^ _ `
lzj lu{
W
i
zzhTzYWWW
- Standalone RFID 1
- Access Controller 1
- RISK OF ELECTRIC SHOCK 2
- DO NOT OPEN 2
- IMPORTANT SAFETY INSTRUCTIONS 3
- 4_ contents 4
- English _ 5 5
- FEATURES 6
- WHAT’S INCLUDED 7
- AT A GLANCE 8
- CABLE COLOR SCHEME 9
- INSTALLING THE WALL MOUNT 10
- CABLE SELECTION 11
- Input Connection 12
- Output Connection 13
- Wiegand DATA0(Pink) 14
- Wiegand DATA0(Sky blue) 14
- BASIC OPERATIONS 15
- WIEGAND OUTPUT SETUP 16
- INITIALIZATION 16
- Connect 17
- (Short-circuit) 17
- READER MODE SETUP (RF ONLY) 18
- English _ 19 19
- 20_ reader mode setup 20
- English _ 21 21
- 22_ user management 22
- English _ 23 23
- 24_ basic setup 24
- English _ 25 25
- 26_ basic setup 26
- English _ 27 27
- 28_ basic setup 28
- I/O time setup 29
- English _ 31 31
- CONTACT SENSOR 33
- 34_ advanced setting 34
- English _ 35 35
- 36_ advanced setting 36
- English _ 37 37
- 38_ additional features 38
- CARD USER 39
- SENSOR ALARM 40
- English _ 41 41
- INITIAL VALUES 42
- FUNCTION CODES 43
- 44_ other information 44
- PRODUCT SPECIFICATIONS 50
- AB82-02555A 51
Philips DVDR3460/75 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Anteny telewizyjne Philips DVDR3460/75.
Dostarczamy 1 pdf podręczników Philips DVDR3460/75 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales