Samsung SSA-P102T Manual de usuario descargar pdf (Pagina 12)

12_ installation and external connection

installation and external connection

POWER, READER, AND I/O CONNECTION

Power Connection

Check the location of the power port.

- Connect the plus (+) line of DC 12V to the corresponding port (+12V).

- Connect the plus (-) line of DC 12V to the GND (-) port.

Reader Connection

- You can safely use other power sources for the reader than supplied from the speciﬁ ed port; however, all

power sources should be connected to the common GND port. Failure of the GND grounding will cause a

transfer error of Wigand data to the controller due to a voltage difference.

Connect Wiegand Data Output 0 of the proximity reader to the D0 port and connect Wiegand Data Output

1 to the D1 port of P102(T).

X Y Z

[ \ ]

^ _ `

lzj lu{

W

i

X Y Z

[ \ ]

^ _ `

lzj lu{

W

i

READER #2

READER #1

BLACK GND

WHITE D1

GREEN D0

RED +12V

BLACK GND

WHITE D1

GREEN D0

RED +12V

DC +12V

GND

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comentarios a estos manuales

Sin comentarios