Samsung SIA-0200Q Manual de usuario descargar pdf (Pagina 11)

English _11

Adjusting the response time (beam blocking volume)

You can use the response time adjustable volume to adjust the time between 50ms and 700ms.

Where an intruder can move across an area quickly, adjust the settings to 50ms; in a fence where unauthorized access is slow,

adjust the settings to 700ms.

Full-speed run – 50 msec

Fast walk – 150 msec

Normal walk – 250 msec

Slow walk – 550 msec

Jump over a fence or obstacle – 700 msec

Alarm Memory

Turn on the DIP switch #4 of the receiver to activate the alarm memory function.

If an alarm occurs, the detector will blink for 55 minutes after 5 minutes of standby. This can inform the patrol-guard that the

sensor has been activated when they arrive on site.

If another alarm occurs while the alarm memory is functioning by the ﬁ rst alarm, the alarm memory will consider the second one

like it's the ﬁ rst and extend the operation time duration accordingly.

•



Alarm occurrence

Memory LED

5 min

55 min (blinking)

60 min (restart operation)

5 min

Z6806119901A-SIA-0100Q,0200Q.ind11 11Z6806119901A-SIA-0100Q,0200Q.ind11 11 2010-03-30 오전 12:18:382010-03-30 오전 12:18:38

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Samsung SIA-0200Q Manual de usuario Pagina 11