Samsung 400CXN-2 Manual de usuario

SyncMaster 400CX-2, 400CXN-2, 460CX-2, 460CXN-2LCD DisplayUser Manual

IntroductionPackage Contents NotePlease make sure the following items are included with your LCD Display.If any items are missing, contact your dealer

• Select a display in Display Selection.• The selection will be set up by pressing a number in the selected mode.Safety Screen The Safety Screen funct

Sets how many pixels the screen moves vertically.Five adjustment levels: 0, 1, 2, 3, and 4.TimeMENU → → → → ENTER → → → → → → → → → EN

You can change the Safety Screen Type.1. Scroll2. Bar3. EraserPeriodMENU → → → → ENTER → → → → → → → → → ENTER →→ → ENTER → → →

This function helps to remove after-images on the screen by moving all the pixels on the LCDaccording to a pattern.Use this function when there are re

→ , → ENTERSelect the brightness of the grey for the screen background.1. Off2. Light3. DarkResolution Select MENU → → → → ENTER → → → →

Power On Adjustment MENU → → → → ENTER → → → → → → → → → → → ENTER→ → , → ENTERAdjusts the Power On time for the screen.OSD Rot

→ , → ENTER NoteAvailable in PC mode only NoteThe Reset function is not available when Video Wall is On.Color Reset MENU → → → → ENTER → → →

MENU → → → → → ENTER → → ENTER→ , → [0~9]• ID SetupAssigns distinctive IDs to the SET.• ID InputUse to select the transmitter functions of

• The server program's Power-On option works only if the LCD Display's power is com-pletely shut off.Please make sure not to use the Power-O

In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktopto make your settings for TCP/IP. You just do that at step

ManualsQuick Setup Guide Warranty Card(Not available in all loca-tions)User's GuideMagicInfo Software CD,MagicInfo Manual CD(Applicable to the CX

You can select which rotation type will be applied to your device.5. Setup InformationShows the settings that have been selected by the user NoteIf th

• HDMI• MagicInfo• TV NoteMagicInfo supports the CXN-2 model only.PictureSizeD.MENU →[Picture] → ENTER → ENTER→[Size]→ , → ENTERYou can switch the

SoundMulti-Track OptionsPreferred LanguageD.MENU → → [Sound] → ENTER → ENTER→ [Multi-Track Options] → ENTER→ [Prefer-red Language]→ , → ENTERYou can

Note• This is only activated if Antenna is set to Cable.ChannelAntennaD.MENU → → → [Channel] → ENTER → ENTER→ [Antenna]→ , → ENTERYou can select a

→ ENTERThe Clear Scrambled Channel function is used to filter out scrambled channels after "AutoProgram" is completed. It removes the scramb

2. Added• All selected channels will be shown on ”Added” menu. To use the Channel List func-tion, first run Auto Program.D.MENU →→ → [Channel] → ENTER

Press the , , or button to select your favorite channels to watch among the labeledchannels. Then press the ENTER button.Press the or button

(Available in Analog TV Mode Only)When Fine Tune is enabled, the symbol "*" appears next to the number at the top.Signal StrengthD.MENU → →

→ ENTER→ , → ENTERYou can choose one of 3 languages.The language chosen affects only the language of the OSD.V-ChipV-Chip LockD.MENU →→ → → [Setup

MPAA RatingD.MENU → → → → [Setup] → ENTER → → → ENTER→ [V-Chip]→ [0~9]→ → →ENTER→ [MPAA Rating]→ , / , → ENTERCanadian-EnglishD.MENU → → →

Sold separatelyD-Sub Cable DVI Cable LAN Cable(Applicable to the CXN-2model only)Wall Mount KIT Component to D-sub Ca-bleD-sub / BNC Cable Semi Stan

→ , / , → ENTER Note• If information is not downloaded from the broadcasting station, the Downloadable U.S.rating menu is deactivated. Parental

Caption ModeD.MENU → → → → [Setup] → ENTER → → → → ENTER→ [Caption] → → EN-TER→ [Caption Mode]→ , → ENTER• The Default is “CC1“.• CC1 : The P

• SizeD.MENU → → → → [Setup] → ENTER → → → → ENTER→ [Caption] → → → ENTER→ [Digital Caption Options] → ENTER→ [Size]→ , → ENTERDefault, Small

→ , → ENTERDefault, White, Black, Red, Green, Blue, Yellow, Magenta, Cyan• Foreground OpacityD.MENU → → → → [Setup] → ENTER → → → → ENTER→ [Ca

SW UpgradeD.MENU →→ → → [Setup] → ENTER → → → → → ENTER→ ENTER→ [SW Up-grade] → ENTER→ [USB]Use to upgrade the software.• USBAdjusting the LCD Di

TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center forproblems that

• Do not use benzene, thinner or other flammable sub-stances.2) Maintaining the Flat Panel Display Screen.Clean with a soft cloth (cotton flannel).• N

Q: The LCD Display screen flickers.A: Check if the signal cable between the computer and the LCD Display is securely con-nected.(Refer to Connecting a

(Refer to the Brightness, Contrast)Q: The screen color is inconsistent.A: Adjust color using Custom under OSD Color Adjustment menu.Q: The color image

A: Check the polarities (+/-) of the batteries.A: Check if the batteries are empty.A: Check if the power is on.A: Check if the power cord is securely

Adjust buttons (Left-Right buttons) / Volume buttonsMoves from one menu item to another horizontally or adjusts selectedmenu values. When OS

A: The video supports the MPEG1 and WMV codecs only. Install the corresponding codecto play the video. Note that some of the codecs can be incompatibl

SpecificationsGeneralGeneralModel Name SyncMaster 400CX-2, 400CXN-2SyncMaster 460CX-2, 460CXN-2LCD PanelSize SyncMaster 400CX-2,400CXN-240 inch (101

Maximum Pixel Clock148.5 MHz (Analog,Digital)Power SupplyThis product supports 100 - 240 V.Since the standard voltage may differ from country to count

Dot AcceptableRED, GREEN, BLUE and WHITE color appear to be bright sometimes or someblack pixels may be seen. This is not from bad quality and you can

Display Mode HorizontalFrequency(kHz)Vertical Fre-quency (Hz)Pixel Clock(MHz)Sync Polarity(H/V)IBM, 640 x 480 31.469 59.940 25.175 -/-IBM, 720 x 400 3

InformationFor a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on thecomputer as described below to enjoy the

Power Off, Screen Saver, or Power Save Mode• Turn the power off for 4 hours after 20 hours in use• Turn the power off for 2 hours after 12 hours in us

• Avoid using a combination of characters and background color with large dif-ference in luminance.Avoid using Grey colors, which can cause Image rete

• Time Period : 1 ~ 5 second ( Recommend : 5 )Apply the Screen Pixel function on Product• Apply the Screen Pixel function- Symptom: Dot with Black Col

• Time Interval : 1 ~ 10 hours ( Recommend : 1 )• Time Period : 10 ~ 50 seconds ( Recommend : 50 )Information116

POWER S/W ON [ │ ] / OFF [O]Switches the LCD Display On/Off. POWERThe power cord plugs into the LCD Displayand the wall outlet. RS232C OUT/IN (RS232

AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact theSAMSUNG customer care cent

EuropeBELGIUM 02 201 2418 http://www.samsung.com/be(Dutch)http://www.samsung.com/be_fr (French)CZECH REPUBLIC 800 - SAMSUNG(800-726786)http://www.sa

Asia PacificAUSTRALIA 1300 362 603 http://www.samsung.com/auCHINA 800-810-5858400-810-5858010-6475 1880http://www.samsung.com/cnHONG KONG:3698 - 4698

Cycle. The inverse number of the Horizontal Cycle is calledHorizontal Frequency. Unit: kHzInterlace and Non-InterlaceMethodsShowing the horizontal l

Correct disposal of batteries in this product - Europe onlyare not properly disposed of, these substances can cause harm to humanhealth or the environ

Use a DVI Cable (DVI-D to DVI-D) - DVImode (Digital PC) DVI / RGB AUDIO IN (PC/DVI/AudioConnection Terminal (Input)) AV / COMPONENT AUD

ANT INConnect the CATV cable or TV antenna ca-ble to the " ANT IN" port on the rear side ofthe LCD Display. Make sure to use a TV an-tenna

2. Connect the Kensington Lock cable.3. Fix the Kensington Lock to a desk or aheavy stationary object. NoteSee Connecting Cables for further informati

4. DEL buttonThe "-" button is used to select Digital channels. For exam-ple, channel 4-1.5. + VOL - Adjusts the audio volume.6. SOURCEP

21. MagicInfo MagicInfo Quick Launch Button.Mechanical Layout (400CX-2 ,400CXN-2)Mechanical LayoutVESA Wall Mount Bracket Installation• When installin

Safety InstructionsNotational NoteThese safety instructions must be followed to ensure your safety and prevent property dam-age.Make sure to read the

DimensionsNoticeFor securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12mm length.Wall Bracket Installation• Contact a

1. Insert and tighten the Captive Screw in the direction of the arrow.When done, mount the wall bracket on the wall.There are two hinges(left and righ

To mount the product on the wall bracketThe shape of the product may vary depending on the model. (The assemblies of the plastichanger and the screw a

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracketholes (1). Then place the product(2) so that it is firmly fixe

Make sure to use the top center, and not the left or the right side of the product to adjust theangle.Mechanical Layout (460CX-2 ,460CXN-2)Mechanical

DimensionsNoticeFor securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12mm length.Wall Bracket Installation• Contact a

There are two hinges(left and right). Use the correct one.A - Captive ScrewB - Wall BracketC - Hinge (Left)D - Hinge (Right)2. Before drilling into th

To mount the product on the wall bracketThe shape of the product may vary depending on the model. (The assemblies of the plastichanger and the screw a

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracketholes (1). Then place the product(2) so that it is firmly fixe

Make sure to use the top center, and not the left or the right side of the product to adjust theangle.Introduction28

Ensure that the power plug is plugged into the power outletfirmly and correctly.• Otherwise, this may result in fire. Do not forcefully be

ConnectionsConnecting a Computer NoteAV input devices such as DVD players, VCRs or camcorders as well as your computer canbe connected to the LCD Disp

Using the HDMI (digital) output on the graphics card.• Connect the HDMI IN port on the monitor to the HDMI port on the PCusing the HDMI cable. Note•

1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side ofthe LCD Display.Make sure to use a TV antenna cable (s

Connecting using a Component Cable1. Connect a set of audio cables between the AV/COMPONENT AUDIO IN [R-AUDIO-L]on the LCD Display and the AUDIO

4. Then, start the Camcorder with a tape inserted. NoteThe audio-video cables shown here are usually included with a Camcorder. (If not, checkyour loc

Connecting Using a DVI Cable1. Connect between the DVI OUT port on the LCD monitor and the input port on anothermonitor using a DVI cable.2. Connect b

Connecting Using a D-SUB / BNC Cable1. Connect the RGB/COMPONENT IN port on the monitor to the BNC port on the PC usingthe D-SUB to BNC cable.Connecti

NoteConnect the LAN cable.(CXN-2 model only)Connecting a USB device NoteYou can connect USB devices such as a mouse or keyboard.(CXN-2 model only)Con

Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Drive

NoteThis monitor driver is certified by Microsoft, and installing it will not damage your system.The certified driver will be posted on Samsung Monit

Keep heating appliances as far away from the power cord or theproduct as possible.• Otherwise, this may result in electric shock or fire. Do not inst

If the message "Windows needs..." is displayed, as shown in the figure below, click"Continue". NoteThis monitor drive

9. Select the model that matches your monitor from the list of monitor models on the screen,and click "Next". 10. Click "Close" →

1. Insert CD into the CD-ROM drive.2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon.3. Cl

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model inthe model list and click the "Next" button.

10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you

4. Select the "Monitor" tab.5. Click the "Change" button in the "Monitor Type" area.6. Choose "Specify the location

10. You have finished setting up your monitor. Execute X-Window after setting other re-quested hardware.MDC (Multi-Display Channel)Installation1

Using MDCUsing the Software46

Introduction A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS-

Main Icons Select ButtonRemocon Info GridSafety Lock Display SelectionPort Selection Control Tools 1. Use the main icons to switch into each screen

Do not spray cleaner directly onto the surface of the product.• Otherwise, this may result in the discoloration and distortion ofthe structure and th

1. The Multiple Display Control is originally set to COM1.2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Sele

Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer2. Use the S

Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - Turns the power of the selected display On/Off.

• PC Mode

Info Grid shows some basic information necessary to Input Source Control.1) PC - Changes the Input Source of the selected display to PC.2) BNC - Chang

The Input Source Control feature is available only for the displays whose power status is ON. Image Size PC, BNC, DVI1. Click Image Size of the m

Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV1. Click Image Size of the main icons and the Image Size control screen appears.Inf

1. Click Time of the main icons and the Time Control screen appears.Info Grid shows some basic information necessary to Time Control.1) Current Ti

PIP Size1. Click PIP of the main icons and the PIP control screen appears. Click Select All or use Check Box to select a display to control. Info

PIP PIP Source1. Click PIP of the main icons and the PIP control screen appears.Info Grid shows some basic information necessary to PIP Source Cont

When you drop the product or the case is broken, turn the poweroff and disconnect the power cord. Contact a Service Center.• Otherwise, this may resu

Settings Picture1. Click Settings of the main icons and the Settings Control screen appears.Info Grid shows some basic information necessary to

-Adjusts the Color Tone for the selected display. 8) Color Temp -Adjusts the Color Temp for the selected display. 9) Brightness Sensor -Adjusts t

2) Contrast -Adjusts Contrast of the selected display. 3) Brightness -Adjusts Brightness for the selected display. 4) Red -Adjusts red Color of the

Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is dis

Image Lock 1. Click Settings of the main icons and the Settings Control screen appears.Info Grid shows some basic information necessary to Settings C

An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenance Control function for all input sources. 2

1) Scroll - This function is used to remove the afterimages that occur when a still screen is displayed on the selected display for a long time. 2

1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen.1) Video Wall - A Video Wall is a set of video

You may not operate this function in MagicInfo.The Input source of TV works only on TV model. The Maintenance Control function is available on

2. Selected one display: Fetches and displays the settings value for the selected display.3. Selected one display (ID1) and add another display (ID

When using headphones or earphones, do not turn the volumetoo high.• Having the sound too loud may damage your hearing.To avoid eyestrain, do not sit

Adjusting the LCD DisplayInputAvailable Modes• PC / DVI• AV• Component• HDMI• MagicInfo• TV NoteMagicInfo supports the CXN-2 model only.Source List ME

PIP NoteAvailable Modes: PIP ONWhen external AV devices such as VCRs or DVDs are connected to the LCD Display , PIPallows you to watch video from thos

• AV : PC / TV• HDMI : PC / TV• TV : PC / DVI / AV / Component / HDMI NoteThe direct button on the remote control is the 'SOURCE' button.Swa

→ , → ENTERChanges the Position of the PIP window.TransparencyMENU → ENTER → → → ENTER → → → → → → → ENTER →→ , → ENTERAdjusts t

• When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC. In other cases,set Edit Name to AV. However, since 640x480, 720P (1280x720),

3. TextNormal brightnessFor documents or works involving heavy text.4. CustomAlthough the values are carefully chosen by our engineers, the pre-config

Color Tone MENU → → ENTER → → → →ENTER → → , → ENTERThe color tones can be changed.(Not available in Dynamic Contrast mode of On.)1. Off2.

GreenMENU → → ENTER → → → → → ENTER → → → ENTER→ → , → ENTERBlueMENU → → ENTER → → → → → ENTER → → → →ENTER → → , → ENT

FineMENU → → ENTER → → → → → → ENTER → → →ENTER → → , → ENTERRemoves noise such as horizontal stripes. If the noise persists even afte

→ , → ENTERSelects either On or Off with the signal control.Signal ControlMENU → → ENTER → → → → → → → → ENTER → → ENTER → → 1. R-Gai

Use only the specified standardized batteries, and do not use anew battery and a used battery at the same time.• Otherwise, the batteries may be damag

MENU → → ENTER → → → → → → → → ENTER →→ ENTER → → → → → → → ENTER→→ , → ENTER6. B-OffsetMENU → → ENTER → → → →

1. Normal2. Low NoteFor Timing which can be used for both the PC and the DTV in DVI, HDMI mode, HDMI BlackLevel will be activated.PIP PictureMENU →

MENU → → ENTER → → → → → → → → → → → ENTER → → ENTER → → → → → , → ENTERAdjusts the Color of the PIP window on the screen. Note•

Adjusts the inverter lamp in order to reduce energy consumption. NoteThis function does not operate when Dynamic Contrast is set to On in PC, DVI, AV,

→ , → ENTERThe LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and"Custom"

ColorMENU → → ENTER → → → ENTER → → → → → ENTER →→ , → ENTERAdjusts the picture Color.TintMENU → → ENTER → → → ENTER → → →

Color Temp MENU → → ENTER → → → → → ENTER → → , → ENTERColor temp is a measure of the 'warmth' of the image colors.(Not available

→ , → ENTERTurns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allowsyou to enjoy clearer and crisper images.1.

→ , → ENTERThe Film Mode feature offers you a theater-quality viewing experience.(In HDMI mode, this function is available when the input signal i

→ , → ENTERAdjusts the difference between the lightest and darkest areas of the PIP window.Adjusts the Sharpness of the PIP window on the screen.4.

• Since the front part of the product is heavy, install the producton a level and stable surface. Do not put any heavy objects on the product.• This m

1. Off2. OnLamp Control MENU → → ENTER → → → → → → → → → → → → ENTER →→ , → ENTERAdjusts the inverter lamp in order to reduce ener

Mode MENU → → → ENTER → → ENTER → → , → ENTERThe LCD Display has a built-in high fidelity stereo amplifier.1. StandardSelects Standard for the

TrebleMENU → → → ENTER → → → ENTER → → → ENTER →→ , → ENTEREmphasizes high frequency audio.BalanceMENU → → → ENTER → → → ENTER →

experience through any two-speaker playback system, including internal television speakers.It is fully compatible with all multichannel formats.1. Off

SetupAvailable Modes• PC / DVI• AV• Component• HDMI• MagicInfo• TV NoteMagicInfo supports the CXN-2 model only.Language MENU → → → → ENTER → → E

→ , → , → ENTERCurrent Time Setting.Sleep TimerMENU → → → → ENTER → → → ENTER → → → ENTER→→ , → ENTERTurns the LCD Display off a

→ , / , → ENTERTurns the LCD Display on automatically at a preset time. Controls the mode and the volumelevel at the time the LCD Display turns

→ [0∼9] → [0∼9] → [0∼9] → [0∼9]The password can be changed. NoteThe preset password for the LCD Display is "0000".Lock OnMENU → → → → EN

When the Video Wall is on, you can adjust the Video Wall screen setting.MENU → → → → ENTER → → → → → → → → ENTER → NoteWhen Video Wall

HorizontalMENU → → → → ENTER → → → → → → → → ENTER → → → → ENTER → → , → ENTERSets how many parts the screen should be divided