Samsung SRP-250 Series Manual del operador descargar pdf (Pagina 34)

ESC c 3 n

[Name] Select paper sensor(s) to output paper end signals.

[Format] ASCII ESC c 3 n

Hex 1B 63 33 n

Decimal 27 99 51 n

[Range] 0 ≤ n ≤ 255

[Description] Selects the paper sensor(s) to output paper end signals.

This command is available only with a parallel interface

and is ignored with serial interface.

• Each bit of n is used as follows.

• This command is available only with a parallel interface and is ignored

with a serial interface.

Bit Off/On Hex Decimal Function

Off 00 0 Paper roll end sensor disabled. 0

On 01 1 Paper roll end sensor enabled.

1 - 7 - - - Undefined.

ESC c 5 n

[Name] Enable/Disable panel button.

[Format] ASCII ESC c 5 n

Hex 1B 63 35 n

Decimal 27 99 53 n

[Range] 0 ≤ n ≤ 255

[Description] Enables or disables the panel button.

• When the LSB is 0, the panel buttons are enabled.

• When the LSB is 1, the panel buttons are disabled.

ESC d n

[Name] Print and feed n lines.

[Format] ASCII ESC d n

Hex 1B 64 n

Decimal 27 100 n

[Range] 0 ≤ n ≤ 255

[Description] Prints the data in the print buffer and feeds n lines.

ESC e n

[Name] Print and reverse feed n lines.

[Format] ASCII ESC e n

Hex 1B 65 n

Decimal 27 101 n

[Range] 0 ≤ n ≤ 2

[Description] Prints the data in the print buffer and feeds n lines

in the reverse direction.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Sin comentarios

Samsung SRP-250 Series Manual del operador Pagina 34