Samsung ML-1640 Series Manual de usuario descargar pdf (Pagina 4)

SAMSUNG ML-2010 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 4

USA Sales: T 800.221.3516 F 888.791.9188

International Sales: T +1 631.590.1040 F +1 631.218.3285

www.summitechnologies.com

8) Remove the two screws from the right side end cap.

Carefully pry off the end cap. See Figure 8

9) Remove the 4 gears, and place aside. See Figure 9

10) Slide the PCR away from the contact side, lift up

and remove. See Figure 10

Clean the PCR with your normal PCR cleaner.

WARNING: Do not clean the OEM PCR with alcohol, as

this will remove the conductive coating from the roller. If

the PCR is an aftermarket, follow the cleaning methods

recommended by the manufacturer. If the PCR is an

OEM, we recommend it be cleaned with your standard

PCR cleaner.

11) Remove the OPC drum. See Figure 11

12) Carefully pry out the fill plug. It fits tight and is easily

damaged. Work a small jeweler’s screwdriver around

the edge until the plug comes free. See Figure 12

13) Clean out any remaining toner from the hopper.

14) Gently pry out the roller plate from the cartridge by

pressing in on a tab located on the bottom of the

cartridge. There is a spring that is in contact with the

developer roller shaft. Move the tail of the spring up so

that as the plate is lifted out, it will fall behind it. See

Figures’ 13 & 14

Figure 8

Figure 9

Figure 10

Figure 11

Figure 12

Figure 13

1 2 3 4 5 6 7 8 9

Sin comentarios

Samsung ML-1640 Series Manual de usuario Pagina 4