Samsung SyncMaster 3 series Manual de usuario descargar pdf (Pagina 14)

8.0

G /D

(

Geometric Distortion )

First Function : Pincushion / Trapezoid

Push this button once to adjust the pin-

cushion and trapezoid of the display.

l Pincushion control

Push G / D button once to display the pin-

cushion OSD. To adjust the vertical sides

of the display from bowing in ( pincushion

) or bowing out ( barrel distortion ), use the

left and right

(b)

buttons until the

sides are straight.

l Trapezoid control

Push G / D button once to display the pin-

cushion OSD. Push either the up or

down (

V)

button to display the trapezoid

OSD. Use the up (A) and down

(V)

but-

tons again to correct any trapezoid

distortion of the display.

Second Function : Parallel/ Tilt

Push this button twice to adjust the

parallel and tilt of the display.

l Parallel control

Push G / D button twice to display the par-

allel OSD. Adjust the parallel of the dis-

play with the left

(4)

and right (

.)

buttons.

l Tilt control

Push G / D button twice to display the tilt

OSD. Push either the up (

A)

or down

(V)

button to display the tilt OSD. Use the up

(A

) and down (

V)

buttons again to cor-

rect the tilt of the display.

9. E$$$ Color Temperature

Use this button to choose the color tem-

perature of the display. After pushing the

color temperature button, use the up

or down (

V)

button to select between

9300°K color ( channel 1 ) and 6500°K color

( channel 2 ).

10.

-

Recall

Use this button to recall factory mode set-

tings. When you push the recall button,

the indicator LED changes color from

green to orange ( the same as any other

function ) and the OSD appears.

Hold down the recall button for several

seconds, or until the indicator LED’s color

changes to green. A green LED indicates

that the factory settings for that timing

have been recalled. The OSD shows the

progress of the recall function.

Note: This operation resets all of the data

in the user memory area for the current

timing signal.

11.

@

Degauss

Magnetic fields can build up on the CRT

and cause color impurity. Use the degauss

button to demagnetize the CRT. Push the

button once to activate the degaussing cir-

cuit. The degaussing circuit automatically

turns itself off after a few seconds.

A

Warning: Don’t push the degauss

button for longer than 5 seconds. If you do,

this operation resets all of the data in the

user memory area. If this occurs, you must

remake your user adjustments.

ENGLISH

12

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comentarios a estos manuales

Sin comentarios