Samsung MZ-5PA064C Manual de usuario descargar pdf (Pagina 13)

Samsung Solid State Drive 13

Firmware Update Manual

General Observations / Limitations

This chapter provides general observations and information on the restrictions on the

Samsung SSD Firmware Update Utility.

General Observations

1. If the Samsung SSD Firmware Update Utility does not start automatically after restarting

the computer, please execute it in DOS mode as follows:

Restarting with the USB disk detects the disk as drive C. The executable files and data

files for the firmware update are stored in the SAMSUNG folder (directory). Do as the

following image indicates to change folders and execute DOSMAIN:

[Figure15. Manual Execution of Firmware Update Utility]

2. In some cases, you will be asked to power the drive OFF/ON depending on the firmware

update type. If the power OFF/ON process is displayed, press [Y] to confirm.

Limitations

1. If SSDs are configured in RAID mode, this Firmware Update Utility cannot detect the

SSDs, Please disable RAID mode in the CIOS, and then update the firmware individually.

After updating the firmware, you can reconfigure RAID mode in the BIOS.

2. The firmware update may not be supported in AHCI mode with some AMD chipsets. If

this is the case, please change AHCI mode to IDE mode in the BIOS, and then update the

firmware. After completion of the firmware update process, you can reconfigure AHCI

mode in the BIOS.

1 2 ... 8 9 10 11 12 13 14 15 16

Sin comentarios

Samsung MZ-5PA064C Manual de usuario Pagina 13