Samsung iPOLiS Manual de usuario

iPOLiS mobile Samsung Techwin’s iPOLiS mobile is an android based dedicated application for smartphones and tablet PCs to remotely monitor and control

10To add video to Favorite listThe user can add video to their Favorite list.1. Select your video, then go to the upper right corner and touch the <

11iPOLiS mobile supports video control only in one-channel mode. To check device informationYou can check the configuration information of a registere

12To flip video image displayedYou can flip video image by rotating 180°. 1. Touch the screen to display menu and touch < > icon.2. Touch agai

13To control digital zoomingThis function is for cameras not supporting optical zooming. 1. Touch the screen to display control buttons near the botto

14Drag the screen in up/down/left/right direction to pan/tilt the camera. Note that iPOLiS mobile does not recognize diagonal direction, which will in

15To run presetsYou can run the preset saved in the camera or NVR.1. Click the preset button to upload the saved preset list.2. Select the desired lis

16To search by date/timeTouch Search < > tab on top of the main screen to display list of searchable devices.1. Select a device by touching it

17To play searched videoAfter searching with date/time, set the beginning time to play the selected video. 1. Check the timeline and drag [ ] to the

18To play event searched videoAfter searching based on date/time, set the beginning/end time to play the selected video. 1. Touch the <Event> bu

19To control playbackIt provides basic playback control. 1. Touch the screen to display control buttons near the bottom. 2. To stop playback, touch &l

2To receive video by connecting your handset to the NW equipment, your handset must satisfy the following requirements.Item RecommendedCPU 1.6GHz Octa

20To use BookmarkYou can bookmark a certain playback point on the video as a starting point.1. While playing a video, touch < > button at a de

21To Add a Device Refer to pages 3 ~ 7.To set/cancel/change password1. Touch the Settings < > tab on the main screen. Select the <Set Pass

22To set the starting page1. Select the start page screen from the “Intro Tab” menu of the settings page, which will be displayed once iPOLiS mobile i

23Device ModelFirmware versionN/W CameraBox/Dome SNB-5000/A, SND-5080/F, SNV-5080/R, SNV-5010, SNO-5080R v2.10 or HigherSNB-7000, SND-7080/F, SNV-7080

OPEN SOURCE ANNOUNCEMENT• LGPL 2.1 : FFmpeg• BSD 2.0 : ed-pad• MIT License V2 : dlc.sh-GUI, SAS-iPad-App, TweetNowGNU LESSER GENERAL PUBLIC LICENSE

"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all

changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, wit

NO WARRANTY15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEP

3To Add a Device1. Move to the Add Device page. A If visited with no added device for the first time, <Add Device> message appears.B To add a

43. Enter the device information to connect.If your device is not found, you will need to enter the device information on your own. • Name : Name the

5 M If you register your device with <Auto add>, model / address type / IP and DDNS / HTTP port are automatically entered. SW NVR does not sup

6  Recommended Profile InformationIt is recommended to set the profile as shown below for optimal Live video monitoring with iPOLiS mobile.Configurat

7To edit the device information1. Touch the Settings tab.2. Go to the "Register" menu and touch the <Device List>.3. Select a device t

8To connect to a device1. Run iPOLiS mobile, and touch the desired device to be connected once device list appears.2. Selecting a network camera or en

9Touch and slide your finger on the screen from right to letft to slide over next screen in case of 4/9 channel mode.To switch to one-channel modeTouc