Samsung 820DXN-2 Manual de usuario

SyncMaster 820DXN-2LCD DisplayUser ManualThe color and the appearance may differ depending on the product, and the specifications are subject to chang

IntroductionPackage Contents NotePlease make sure the following items are included with your LCD Display.If any items are missing, contact your dealer

• For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies.• For drive D:, EWF is not applied.• To save Setup con

When using multiple languages, you can choose and set a specific language among them.4. Select Screen Type - step 4You can select which rotation type

Shows the settings that have been selected by the user. NoteIf the MagicInfo icon is not displayed on the notification area, double click the MagicIn

TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center for problemsthat

• Do not use benzene, thinner or other flammable substan-ces.2) Maintaining the Flat Panel Display Screen.Clean with a soft cloth (cotton flannel).• N

A: Check if the signal cable between the computer and the LCD Display is securely connected.(Refer to Connecting a Computer)Problems related to the Sc

A: Adjust color using Custom under OSD Color Adjustment menu.Q: The color image is distorted by dark shadows.A:Adjust color using Custom under OSD Col

A: Check if the power cord is securely connected.A: Check if a special fluorescent or neon lamp is on in the vicinity.Q & AQ:How can I change the

SpecificationsGeneralGeneralModel Name SyncMaster 820DXN-2LCD PanelSize 207 cmDisplay area 1805.76 mm (H) x 1015.74 mm (V)Pixel Pitch 0.9405 mm (H) x

VESA Mounting Interface1400 x 800 mm ,900 x 800 mmEnvironmental considerationsOperating Temperature : 50°F ~ 104°F (10°C ~ 40°C)Humidity : 10 % ~ 80 %

ManualsQuick Setup Guide Warranty Card(Not available in some loca-tions)User ManualMagicInfo Software CD,MagicInfo Manual CDCables Power Cord D-Sub Ca

Display Mode HorizontalFrequency(kHz)Vertical Fre-quency (Hz)Pixel Clock(MHz)Sync Polarity(H/V)IBM, 640 x 350 31.469 70.086 25.175 +/-IBM, 640 x 480 3

InformationFor Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computeras described below to enjoy the b

Power Off, Screen Saver, or Power Save Mode• Turn the power off for 4 hours after 20 hours in use•Turn the power off for 2 hours after 12 hours in use

• Avoid using a combination of characters and background color with large difference inluminance.Avoid using Grey colors, which can cause Image retent

• Apply the Screen Pixel function- Symptom: Dot with Black Color move up and down.• Apply the Screen Bar function- Symptom: Horizontal / Vertical Bar

AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact the SAMSUNGcustomer care cent

Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co.,Ltd. is strictly forbidden.Samsung Electronics Co., Lt

Your LCD DisplayFrontMENU button [MENU]Opens the on-screen menu and exits from the menu. Also use to exit the OSD menuor return to the previous menu.N

• HDMI : PC / BNCPower button [ ]Use this button for turning the LCD Display on and off.Brightness Sensor (Optional)Automatically detects the surround

RS232C OUT/IN (RS232C Serial PORT)MDC(Multiple Display Control) Program Port RGB IN (PC Connection Terminal (Input))• Use a D-Sub Cable (15 pin D-Sub

AV IN [VIDEO]Connect the [ VIDEO ] terminal of your monitorto the video output terminal of the external deviceusing a VIDEO cable.AUDIO OUTHeadphone/

RGB OUT LAN (LAN Connection Terminal)USB1,USB2 (USB Connection Terminal)Keyboard / Mouse, Mass Storage Device Com-patible. NoteSee Connecting Cables

1. POWERTurns the product On.2. OFFTurns the product Off.3. Number Buttons Used to enter the password during the OSD adjustment or to useMagicInfo

broadcasting type by using the DUAL button on the remote controlwhile watching TV.14. ENTER/PRE-CHThis button is used to return to the immediately p

Installation VESA Bracket• When installing VESA, make sure to comply with the international VESA standards.•Purchasing VESA Bracket and Installation I

Safety InstructionsNotational NoteThese safety instructions must be followed to ensure your safety and prevent property damage.Make sure to read the i

Wall Bracket(1) Hinge(Left 1, Right1)PlasticHanger(4)Screw(A)(11)Screw(B)(4)Anchor(11)Wall Bracket Assembly NoteThere are two hinges(left and right)

A - Length between the two locking holes3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drillholes deep

2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make sure it is properly fixed to the left and rightpl

A - LCD DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc

ConnectionsConnecting a ComputerThere are several ways to connect the computer to the monitor. Choose one fromthe following options. Using the D-sub

Using the HDMI (digital) output on the graphics card.• Connect the HDMI IN port on the monitor to the HDMI port on the PC usingthe HDMI cable. NoteWh

Connect the DVI/RGB AUDIO IN port on the rear side of the monitor to the soundcard of the PC.Connect the power cord for your LCD Display to the power

Connecting to a Camcorder1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of thecamcorder. Connect a set of

2. Select BNC for the Camcorder connection using the Source button on the front of the LCD Displayor on the remote control.Connecting Using a DVI Cabl

Connecting Using a DVI to HDMI Cable1. Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the LCDDisplay using a DV

Do not forcefully bend or pull the power plug and do not place anyheavy material on it.• Otherwise, this may result in fire. Do not connect multiple

Note• Select Component for the connection to a DVD player using the SOURCE button on the front ofthe LCD Display or on the remote control.• Then, sta

1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and AUDIOOUT on LCD Display.Connecting a LAN CableConnect the LAN cabl

Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROMincluded with this monitor. Driver

NoteThis monitor driver is certified by Microsoft, and installing it will not damage your system.The certified driver will be posted on Samsung Monit

NoteThis monitor driver is under certifying MS logo, and this installation will not damage your system.The certified driver will be posted on Samsung

9. Select the model that matches your monitor from the list of monitor models on the screen, andclick "Next". 10.Click "Close" → &

1. Insert CD into the CD-ROM drive.2.Click "Start" → "Control Panel", then click the "Appearance and Themes" icon.3. Cli

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the modellist and click the "Next" button.

10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you

4. Select the "Monitor" tab.5. Click the "Change" button in the "Monitor Type" area.6.Choose "Specify the location

Do not install it in a badly ventilated location such as a bookcase orcloset.• Otherwise, this may result in fire due to an increase in the internalt

MDC (Multi-Display Control)Installation1. Insert the installation CD into the CD-ROM drive.2.Click the MDC installation file. NoteIf the popup window

Introduction A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS-

Main Icons Select ButtonRemocon Info GridSafety Lock Display SelectionPort Selection Control Tools 1. Use the main icons to switch into each screen

1. The Multiple Display Control is originally set to COM1.2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Sele

Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer2. Use the S

Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - Turns the power of the selected display On/Off.

• PC Mode

Info Grid shows some basic information necessary to Input Source Control.1) PC - Changes the Input Source of the selected display to PC.2) BNC - Chang

The Input Source Control feature is available only for the displays whose power status is ON. Image Size PC, BNC, DVI1. Click Image Size of the m

Image Size TV, AV, S-Video, Component, DVI (HDCP), HDMI, DTV1. Click Image Size of the main icons and the Image Size control screen appears.In

When cleaning the product, disconnect the power cord and clean itwith a soft, dry cloth.• Do not use chemicals such as wax, benzene, alcohol, thinner

1. Click Time of the main icons and the Time Control screen appears.Info Grid shows some basic information necessary to Time Control.1) Current Ti

PIP Size1. Click PIP of the main icons and the PIP control screen appears. Click Select All or use Check Box to select a display to control. Info

PIP PIP Source1. Click PIP of the main icons and the PIP control screen appears.Info Grid shows some basic information necessary to PIP Source Cont

Settings Picture1. Click Settings of the main icons and the Settings Control screen appears.Info Grid shows some basic information necessary to

-Adjusts the Color Tone for the selected display. 8) Color Temp -Adjusts the Color Temp for the selected display. 9) Brightness Sensor -Adjusts t

2) Contrast -Adjusts Contrast of the selected display. 3) Brightness -Adjusts Brightness for the selected display. 4) Red -Adjusts red Color of the

Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is dis

Image Lock 1. Click Settings of the main icons and the Settings Control screen appears.Info Grid shows some basic information necessary to Settings C

An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenance Control function for all input sources. 2

1) Scroll - This function is used to remove the afterimages that occur when a still screen is displayed on the selected display for a long time. 2

Make sure that the ventilating opening is not blocked by a table orcurtain.• Otherwise, it may result in fire due to an increase in the internal tem-

1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen.1) Video Wall - A Video Wall is a set of video

You may not operate this function in MagicInfo.The Input source of TV works only on TV model. The Maintenance Control function is available on

2. Selected one display: Fetches and displays the settings value for the selected display.3. Selected one display (ID1) and add another display (ID

Adjusting the LCD DisplayInputAvailable Modes• PC / DVI / BNC• AV• Component• HDMI• MagicInfoSource List MENU → ENTER → → ENTER → → , → ENTERUse

Note•If you select , , in Size, Position and Transparency will not be activated.PIPMENU → ENTER → → → ENTER → → ENTER → → , → ENTERTur

Swaps the contents of the PIP and main image.The image in the PIP window will appear on the main screen, and the main screen image will appearin the P

→ , → ENTERAdjusts the Transparency of PIP windows.• High• Medium• Low• Opaque Note• PIP turns off when the LCD Display is switched to an external

Picture [PC / DVI / BNC / MagicInfo Mode]Available Modes• PC / DVI / BNC• AV• Component• HDMI• MagicInfoMagicBright MENU → → ENTER → → ENTER → →

Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference.MENU → → ENTER → → → ENTER → (Not av

The color tones can be changed.(Not available when Dynamic Contrast is set to On.)1. Off2. Cool3. Normal4. Warm5. Custom NoteIf you set the Color Tone

• If you use the product in a location exposed to vibrations, it maydamage the product and result in fire. When moving the product, turn the po

Color Temp. MENU → → ENTER → → → → → → ENTER → → , → ENTERColor Temp. is a measure of the 'warmth' of the image colors.(Not av

→ , , , → ENTERAdjusts the screen location horizontally and vertically.Auto Adjustment MENU → → ENTER → → → → → →

1. R-GainMENU → → ENTER → → → → → → → → → ENTER → → ENTER → → → ENTER → → , → ENTER2. G-GainMENU → → ENTER → →

Size MENU → → ENTER → → → → → → → → → → ENTER → → , → ENTERThe Size can be switched.1. 16:92. 4:3HDMI Black Level MENU → → EN

Note• Available Modes: PIP ON1. ContrastMENU → → ENTER → → → → → → → → → → → ENTER → → ENTER→ → , → ENTERAdjusts the Contrast of the

→ , → ENTERAdds a natural tone to the PIP window. NoteEnabled only when the PIP input is selected in AV, HDMI or Component mode. Operates onlyif th

Brightness Sensor automatically detects distribution of the inputted visual signal and adjusts to createoptimum brightness.1. Off2. OnPicture [ AV / H

ContrastMENU → → ENTER → → → ENTER → → ENTER→ → , → ENTERAdjusts the Contrast.BrightnessMENU → → ENTER → → → ENTER → →

→ , → ENTERThe color tones can be changed. The individual Color components are also user adjustable.(Not available when Dynamic Contrast is set to

→ , → ENTERThe Size can be switched.1. 16:9: Sets the picture to 16:9 wide mode.2. Zoom 1: Magnifies the size of the picture on the screen.3. Zoom

Do not use a humidifier near the product.• Otherwise, this may result in electric shock or fire. When there is a gas leak, do not touch the product o

→ , → ENTERWhen a DVD or set-top box is connected to your TV via HDMI or DVI, it may cause a degradationin the screen quality, such as an inc

Note• Available Modes: PIP ON1. ContrastMENU → → ENTER → → → → → → → → → → ENTER →→ ENTER→ → , → ENTERAdjusts the Contrast of t

→ , → ENTERAdds a natural tone to the PIP window. NoteThis function is not available if PC signal is received while in DVI or HDMI mode.Dynamic Con

Brightness Sensor automatically detects distribution of the inputted visual signal and adjusts to createoptimum brightness.1. Off2. OnSoundAvailable M

MENU → → → ENTER → → → ENTER → Note• You can hear the sound even when sound value is set to 0.•If you adjust sound using Custom function, Mode w

SRS TS XT MENU → → → ENTER → → → → → ENTER → → , → ENTERSRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multich

→ , → ENTERWhen you use the product with it connecting to a Home theater, turn the Internal speakers off so youcan listen to sound from the Home t

Clock SetMENU → → → → ENTER → → → ENTER → → ENTER→ → , → , → ENTERCurrent Time Setting.Sleep TimerMENU → → → → ENTER → →

→ , / , → ENTERTurns the LCD Display on automatically at a preset time. Controls the mode and the volume level atthe time the LCD Display turns

→ [0∼ 9] → [0∼ 9] → [0∼ 9] → [0∼ 9]The password can be changed. NoteThe preset password for the LCD Display is "0000".Lock OnMENU → → →

• Make sure to connect the product to a dedicated power outlet and do not connectit to a multi-plug extension cord.If you have to use a multi-plug ext

When the Video Wall is on, you can adjust the Video Wall screen setting.MENU → → → → ENTER → → → → → → → → ENTER → NoteWhen

HorizontalMENU → → → → ENTER → → → → → → → → ENTER → → → → ENTER → → , → ENTERSets how many parts the screen should be divided

• Select a display in Display Selection.• The selection will be set up by pressing a number in the selected mode.Safety Screen The Safety Screen funct

Sets how many pixels the screen moves vertically.Five adjustment levels: 0, 1, 2, 3, and 4.TimeMENU → → → → ENTER → → → → → → → →

You can change the Safety Screen Type.1. Scroll2. Bar3. EraserPeriodMENU → → → → ENTER → → → → → → → → → ENTER →→ → ENTER →

This function helps to remove after-images on the screen by moving all the pixels on the LCD accordingto a pattern.Use this function when there are re

→ , → ENTERSelect the brightness of the grey for the screen background.1. Off2. Light3. DarkResolution Select MENU → → → → ENTER → → → →

→ , → ENTERAdjusts the Power On time for the screen.OSD Rotation MENU → → → → ENTER → → → → → → → → → → → → →→ → ENTER → →

NoteAvailable in PC mode only NoteThe Reset function is not available when Video Wall is On.Color Reset MENU → → → → ENTER → → → → → → →

Assigns distinctive IDs to the SET.• ID InputUse to select the transmitter functions of the individual SET. Only a SET where the ID correspondsto the