SyncMaster 400DX-3/460DX-3LCD DisplayUser ManualThe color and the appearance may differ depending on the product, and the specifications are subject t
IntroductionPackage ContentsChecking the Contents of the PackageRemove the lock from the package box, as shown in the figure above.Lift up the package
SizeThe Size can be switched.1. 16:92. 4:3PIP PictureAdjusts the PIP Screen Settings. Note• Available Modes: PIP On1. ContrastAdjusts the Contrast of
NotePIP input only operates in AV, HDMI, or Component mode.Dynamic ContrastDynamic Contrast automatically detects the distribution of the visual sign
Picture [ AV / HDMI / Component Mode]Available Modes• PC / DVI / DisplayPort• AV• Component• HDMI• MagicInfo• TV Note• A TV tuner box (sold separately
ContrastAdjusts the Contrast.BrightnessAdjusts the Brightness.SharpnessAdjusts the picture Sharpness.ColorAdjusts the picture Color.TintAdds a natural
4. Normal5. Warm16. Warm2 NoteIf you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp.function is disabled.Color Temp.Color
Note• Certain external devices may feed the display an out of spec signal that may cause cutoffeven when using the Screen Fit feature.• Zoom 1, Zoom
Film ModeFilm Mode calibrates unnatural pictures that may occur in a movie (which is in 24 frames).Moving subtitles may appear corrupted when this mod
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts tocreate an optimum contrast.1. Off2. On NoteThis function is
• TV Note• A TV tuner box (sold separately) must be connected to use the TV. (US Only)• MagicInfo can only be enabled when a network box is connected.
Emphasizes high frequency audio.BalanceAllows you to Adjusts the sound balance between the left and right speakers.Auto VolumeReduces the difference i
ManualsQuick Setup Guide Warranty Card(Not available in all loca-tions)User ManualCables Power Cord D-Sub Cable Others Remote Control(BP59-00138B)Bat
NoteAvailable when PIP is set to On.1. Main2. SubSpeaker Select When you use the product with it connecting to a Home theater, turn the Internal spea
Note• A TV tuner box (sold separately) must be connected to use the TV. (US Only)• MagicInfo can only be enabled when a network box is connected.Lang
2. 303. 604. 905. 1206. 1507. 180Timer1 / Timer2 / Timer3You can set the LCD display to automatically turn on or off at a specified time. Note• Hoilda
You can delete selected holidays. Note• Only enabled when registered holidays are selected.• More than one holiday can be selected and deleted.• Delet
NoteIf you forgot your password, press the remote buttons INFO → EXIT → MUTE to reset thepassword to "0000."Lock OnThis is the function tha
Turns Off/On the Video Wall function of the selected display Off/On.• Off• OnFormatThe Format can be selected to see a divided screen.• FullProvides a
NoteIf Horizontal is set to 15, the maximum value for Vertical is 6.Screen PositionThe screen can be divided into several images. A number of screens
HorizontalSets how many pixels the screen moves horizontally.Five adjustment levels: 0, 1, 2, 3, and 4.VerticalSets how many pixels the screen moves v
• Off• OnModeYou can change the Safety Screen Type.• Bar• Eraser• PixelPeriodUse this function to set the execution period for each mode set in the ti
This function prevents after-images on the screen by moving long black and white verticallines.EraserThis function prevents after-images on the screen
Sold separatelyWall Mount KIT TV Tuner Box (US Only) HDMI Cable HDMI-DVI Cable Your LCD DisplayFrontMENU button [MENU]Opens the on-screen menu an
When the picture is not displayed properly on the screen when setting the graphics cardresolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 6
Advanced SettingsConfigures the settings more elaborately.TemperatureProtects the product by detecting the internal temperature.Temperature ControlDet
• Off• On NoteWhen Auto Power is On, the product will power on automatically as soon as it is connectedto power.Button LockLocks or unlocks the monito
Sets the standby mode, which will be activated when no input signal is detected.• OffA message will read <No Signal> if no input signal is detec
Not Optimum Mode OSD• Off• OnNo Signal OSD• Off• OnMDC OSD• Off• OnSoftware UpgradePerforms a software upgrade.1. Connect the product to a computer vi
NoteWhen there are two or more BMP images, they are displayed on the screen using aslideshow.• It is recommended that the playback interval between t
Reset all the settings for the display.Multi ControlAvailable Modes• PC / DVI / DisplayPort• AV• Component• HDMI• MagicInfo• TV Note• A TV tuner box (
• Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.• Gateway : Manually enter the Gateway if IP Setting is set to Manual.Ma
• To setup MagicInfo on a Windows screen, a keyboard and mouse are required.• To setup MagicInfo on a Windows screen, refer to the MagicInfo Server He
In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktopto make your settings for TCP/IP. You just do that at step
However, the picture may display abnormally if the connected externalinput signal is different from the selected video signal.• A TV tuner box (sold s
You can select which rotation type will be applied to your device.5. Setup InformationShows the settings that have been selected by the user. NoteIf t
TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center forproblems that
• Do not use benzene, thinner or other flammable sub-stances.2) Maintaining the Flat Panel Display Screen.Clean with a soft cloth (cotton flannel).• N
A: Check if the signal cable between the computer and the LCD Display is securely con-nected.(Refer to Connecting a Computer)Problems related to the S
Q: The screen color is inconsistent.A: Adjust color using Custom under OSD Color Adjustment menu.Q: The color image is distorted by dark shadows.A: Ad
A: Check if a special fluorescent or neon lamp is on in the vicinity.Q & AQ: How can I change the frequency?A: The frequency can be changed by rec
SpecificationsGeneralGeneralModel Name SyncMaster 400DX-3 / 460DX-3LCD PanelSize 400DX-3 40 inches (101 cm)460DX-3 46 inches (116 cm)Display area 400D
Dimensions (W x H x D)Without Stand 1068.0 x 620.5 x 130.0 mm / 42.1 x 24.4 x 5.1inches1068.0 x 620.5 x 136.0 mm / 42.1 x 24.4 x 5.4inches (With prote
Dot AcceptableFor example, the number of TFT-LCD sub pixels contained in this product are6,220,800. NoteDesign and specifications are subject to chang
State Normal Opera-tionPower savingmodePower off Power off(Power Swich)Power Indicator On (Green) Blinking Amber OffPower Con-sumption(With NetworkBox
POWER S/W ON [ │ ] / OFFSwitches the LCD Display On/Off. POWERThe power cord plugs into the LCD Displayand the wall outlet. IR OUT/INReceives a sign
Display Mode HorizontalFrequency(kHz)Vertical Fre-quency (Hz)Pixel Clock(MHz)Sync Polarity(H/V)VESA, 1024 x 768 56.476 70.069 75.000 -/-VESA, 1024 x 7
InformationFor a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on thecomputer as described below to enjoy the
Power Off, Screen Saver, or Power Save Mode• Turn the power off for 4 hours after 20 hours in use• Turn the power off for 2 hours after 12 hours in us
• Avoid using a combination of characters and background color with large dif-ference in luminance.Avoid using Grey colors, which can cause Image rete
• Apply the Screen Bar function- Symptom: Horizontal / Vertical Bar with Black Color move up and down.Apply the Screen Erasing function on Product• Ap
AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact theSAMSUNG customer care cent
Europehttp://www.samsung.com/be_fr (French)BOSNIA 05 133 1999 http://www.samsung.comBULGARIA 07001 33 11 http://www.samsung.comCROATIA 062 SAMSUNG (06
EuropeSWITZERLAND 0848 - SAMSUNG (7267864,CHF 0.08/min)http://www.samsung.com/chhttp://www.samsung.com/ch_fr/(French)U.K 0330 SAMSUNG (7267864) http:/
Asia PacificJAPAN 0120-327-527 http://www.samsung.comMALAYSIA 1800-88-9999 http://www.samsung.comPHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLDT1-800-
tance between two dots of the same color is called the 'DotPitch'. Unit: mmVertical Frequency The screen must be redrawn several times per s
• The status of the cable may have a greateffect on the Loopout performance. RGB/COMPONENT IN (PC/COMPO-NENT Connection Terminal (Input))• Connect the
Correct DisposalCorrect Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European cou
AuthorityInformation in this document is subject to change without notice.© 2010 Samsung Electronics Co., Ltd. All rights reserved.Reproduction in any
Connect a headphone or an External speak-er. DC OUTMake sure to use connecting [DC OUT] ter-minal to the authorized TV-Tuner Box. (USOnly) Otherwise,
RJ 45 MDC (MDC PORT)MDC(Multiple Display Control) Program PortConnect the LAN cable to [RJ45 MDC] on theproduct and LAN on the PC. To use an MDC,the
Note• You must purchase the Kensington Lockseparately.• These are general instructions. For exactinstructions, see the User Manual sup-plied with the
Connects to a mains socket via the powercord. POWER S/W ON [ I ] / OFFTurns the network box on or off. NoteThe power switches of both of the monitor a
Safety InstructionsNotational NoteThese safety instructions must be followed to ensure your safety and prevent property dam-age.Make sure to read the
POWERTurns the product On/Off. OFFTurns the product Off. Number ButtonsUsed to enter the password during the OSD adjustment orto use MagicInfo.Pr
FM Stereo Mono Mono ManualChangeStereo Mono ↔ StereoSAP Mono ↔ SAP MonoDUAL-STEREO/MONO, DUAL l / DUAL ll and MONO/NICAMMONO/NICAM STEREO can be opera
1 21. The product can be tilted up to 15 degrees from a vertical wall.2. To use the product in portrait mode, rotate it clockwise so that the LED indi
2. Embedded Mount guide<Side view> <Top view>A : min. 40 mmB : min. 70 mmC : min. 50 mmD : min. 50 mmE : Ambient temperature Measuring poi
Mechanical LayoutInstallation VESA Bracket• When installing VESA, make sure to comply with the international VESA standards.• Purchasing VESA Bracket
DimensionsNoticeFor securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12mm length.Accessories (sold separately)• Dimen
• Dimension with welcome boardIntroduction
• Dimension with other accessoriesWall Bracket Installation• Contact a technician for installing the wall bracket.Introduction
• SAMSUNG Electronics is not responsible for any damages to the product or harm tocustomers when the installation is done by the customer.• This produ
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracketholes (1). Then place the product(2) so that it is firmly fixe
Ensure that the power plug is plugged into the power outletfirmly and correctly.• Otherwise, this may result in fire. Do not forcefully bend or pull
Make sure to use the top center, and not the left or the right side of the product to adjust theangle.Remote Control (RS232C)Cable connectionsinterfac
• RS232C cableConnector : 9-pin D-SubCable : Cross (reversed) cable-P1- -P1- -P2- -P2-FEMALE RxTxGnd235---------><-------------------325RxTxGndF
1 Power control 0x11 0~12 Volume control 0x12 0~1003 Input source control 0x14 -4 Screen Mode control 0x18 -5 Screen Size control 0x19 0~2556 PIP on/o
• AckHeadercom-mandIDDATALengthAck/Nak r-CMD Val1CheckSum0xAA 0xFF 3 ‘A’ 0x11 PowerPower : Same as above• NakHeadercom-mandIDDATALengthAck/Nak r-CMD V
• Input Source Control• FunctionPersonal Computer changes input source of TV / Monitor.• Get Input Source StatusHeader commandIDDATA LengthCheckSum0xA
0xAA 0xFF 3 ‘A’ 0x14InputSourceInput Source : Same as above• NakHeadercom-mandIDDATALengthAck/Nak r-CMD Val1CheckSum0xAA 0xFF 3 ‘N’ 0x14 ERRERR : Erro
• NakHeadercom-mandIDDATALengthAck/Nak r-CMD Val1CheckSum0xAA 0xFF 3 ‘N’ 0x18 ERRERR : Error code that shows what occurred error is• Screen Size Contr
• Set the PIP ON / OFFHeader commandIDDATALengthDATACheckSum0xAA 0x3C 1 PIPPIP : The PIP ON / OFF code to set for the TV or Monitor1 : PIP ON0 : PIP O
0xAA 0xFF 3 ‘A’ 0x3DAuto Ad-justment• NakHeadercom-mandIDDATALengthAck/Nak r-CMD Val1CheckSum0xAA 0xFF 3 ‘N’ 0x3D ERRERR : Error code that shows what
Headercom-mandIDDATALengthAck/Nak r-CMD Val1CheckSum0xAA 0xFF 3 ‘N’ 0x5C ERRERR : Error code that shows what occurred error is• Safety Lock• FunctionP
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG-ARETTES AND ANY HEATING APPLIANCES NEAR THEPRODUCT.• Otherwise, this may result in fire. Keep heating a
ConnectionsConnecting a ComputerThere are several ways to connect the computer to the monitor. Chooseone from the following options. Using the D-sub
NoteSelect HDMI2 or HDMI1 as an input source when connected to the PC viaan HDMI cable.To obtain normal picture and audio from the PC, HDMI2 or HDMI1
Connect between the [DVI OUT(LOOPOUT)] port on the LCD Display andthe input port on another monitor using a DVI cable. Connect between the [AUDIO O
Connecting to a Camcorder1. Locate the AV output jacks on the camcorder. They are usually found onthe side or back of the camcorder. Connect a video c
Connecting Using a HDMI Cable1. Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] or [HDMI IN 1] onthe product and the HDMI output port on a digital de
NotePress SOURCE on the product or remote control and select "HDMI1 / HDMI2"Connecting a DVD Player Connect a RGB to Component cable betwe
Connecting a DTV Set Top (Cable/Satellite) Box Connect a RGB to Component cable between the [RGB/COMPONENTIN] port on the LCD Display and the PR, Y,
Connecting a Network Box (sold separately) Note• Network boxes are sold separately.• For more information on how to purchase and install a network box
Connecting a LAN Cable1. Connect the LAN cable between the [LAN] port on the product and the[LAN] port on your PC.Connecting a USB devices1. You can c
Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Drive
When cleaning the power plug pins or dusting the power outlet,clean it with a dry cloth.• Otherwise, it may result in fire. When cleaning the product
NoteThis monitor driver is certified by Microsoft, and installing it will not damage your system.The certified driver will be posted on Samsung Monit
If the message "Windows needs..." is displayed, as shown in the figure below, click"Continue". NoteThis monitor driver is under ce
9. Select the model that matches your monitor from the list of monitor models on the screen,and click "Next". 10. Click "Close" →
1. Insert CD into the CD-ROM drive.2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon.3. Cl
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model inthe model list and click the "Next" button.
10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you
If you can see the "Digital Signature Not Found" window, then click the "Yes" button.Then click the "Finish" button and
5. Set a Keyboard for your computer.6. The next screen is for setting your monitor.7. First of all, set a horizontal frequency for your monitor. (You
MDC Program Installation/UninstallationInstallation1 Insert the installation CD into the CD-ROM drive.2 Click the MDC Unified installation program. If
Connecting to MDCUsing MDC via RS-232C (serial data communications standards)An RS-232C serial cable must be connected to the serial ports on the PC a
If thunder or lightning is occurring, do not touch the power cordor antenna cable.• Otherwise, this may result in electric shock or fire. Do not try
Using MDC via EthernetEnter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an
Connection ManagementConnection management includes the Connection list and Connection list modification options.Connection list – Connection list sho
Auto Set IDAuto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs
Command RetryThis feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupte
Getting Started with MDC1 To start the program, click Start Programs Samsung MDC Unified.2 Click Add to add a display device. If the connection is
If the connection is established via Ethernet, enter the IP that was entered for the display device.
Main Screen Layout Menu BarChange the status of a display device or the properties of the program. Device CategoryView a list of connected display dev
MenusYou can power on or off a selected device or change the input source or volume of the device.Choose display devices from the list of sets, and se
This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor error, or lamp error.Select
Screen AdjustmentThe screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Pictur
To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitorfor one (1) hour.This reduc
OptionsDynamic ContrastAdjust the Dynamic Contrast for the selected display device. Gamma ControlChange the gamma value for the selected display. Auto
SizePicture SizeAdjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does no
Sound AdjustmentYou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item wil
3.6.11 System SetupChoose display devices from the list of sets, and select the System tab. Video WallThe Video Wall function can be used to display p
HSelect the number of horizontal display devices.A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assig
PIPBasic information required to adjust PIP will appear in the menu screen. PIP will be disabled when Video Wall is ON. Note that Picture Size is d
GeneralUser Auto ColorAutomatically adjust the screen colors. Available only in PC mode. Auto PowerSet the product to automatically power on.Standby C
SecuritySafety LockLock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button LockLock the buttons on the display device. To unlock
TimeClock SetChange the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, n
Once: Activate the timer only one time. EveryDay: Activate the timer every day. Mon~Fri: Activate the timer from Monday through Friday. Mon~Sat:
The batteries (and rechargeable batteries) are not ordinary re-fuse and must be returned for recycling purposes. The customeris responsible for retur
Screen Burn ProtectionPixel ShiftMove the screen slightly at specified time intervals to prevent screen burn-in.Screen SaverThis function prevents scr
The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended pe
ResetReset PictureReset the screen settings.Reset SoundReset the sound settings.Reset SystemReset the system settings.Reset AllReset the screen, soun
3.6.13 Other FunctionsResizing a WindowPlace the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize th
Group ManagementCreating GroupsCreate groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and se
The Add on the same level button is enabled only if at least one group is created. 3 Enter the group name.Deleting Groups1 Select a group name, and c
Schedule ManagementCreating SchedulesCreate and register a schedule on a group basis.1 Click All Schedule List in the schedule section on the left sid
3 Click Add below the Device Group item, and select the group you want to add a schedule to.4 Select Date&Time/Action and click OK. The schedule w
Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitte
How display properties are shown when multiple displays are used1 When no display is selected: The default value is displayed.2 When one display is se
Do not put any heavy objects on the product.• This may result in personal injury and/or damage to the prod-uct.Safety Instructions
Adjusting the LCD DisplayInputAvailable Modes• PC / DVI / DisplayPort• AV• Component• HDMI• MagicInfo• TV Note• A TV tuner box (sold separately) must
However, the picture may display abnormally if the connected external input signal is differentfrom the selected video signal.PIP NoteThe PIP function
• HDMI : PC• DisplayPort : PCSizeChanges the Size of the PIP window. Note<Size> will be changed to <16:9> when <PIP> is <On>.P
Edit NameName the input device connected to the input jacks to make your input source selectioneasier.VCR / DVD / Cable STB / HD STB / Satellite STB /
Source AutoSwitchWhen the Source AutoSwitch is On, the display video source will automatically be searchedfor active video.The Primary Source selectio
Specify Primary Source for the automatic input source.Secondary SourceSpecify Secondary Source for the automatic input source.Picture [PC / DVI / Disp
Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads).3. CustomCustom By using the on-screen menus, the contrast and bright
Color Tone NoteNot available when Dynamic Contrast is set to On.The color tones can be changed.1. Off2. Cool3. Normal4. Warm5. Custom NoteIf you set t
Color Temp. is a measure of the 'warmth' of the image colors. NoteThis function is enabled when Mode is set to Custom, and Dynamic Contrast
Note• Available in PC mode only.• Not available when Dynamic Contrast is set to On.Signal BalanceSelects either On or Off with the signal balance.Sig
Comentarios a estos manuales